Tester is connected to fuel gauge. Tester has its own power. 9vt batt.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Tester is connected to fuel gauge. Tester has its own power. 9vt batt.
Yup, only needs 9vts to test, since it all goes thru the Isnt panel Volt reg, that drops power to 5.5 anyhow.
Tester also has switch to work off 12vt vehicle batt if gauges are still in car.
Princess Valiant
A.K.A. Rainy Day Auto
i did a different approach and made it so that it plugs into A/C
a battery will probably be added to make it more mobile.
I made it so that it can loop test OR single gauge test.
I did a built in regulator so that a regulator can be plugged in to test the regulator itself and it can go into loop mode so you hook up a gas sending unit and as you move the float you can see the gauge move in real time.
a battery will probably be added to make it more mobile.
I made it so that it can loop test OR single gauge test.
I did a built in regulator so that a regulator can be plugged in to test the regulator itself and it can go into loop mode so you hook up a gas sending unit and as you move the float you can see the gauge move in real time.
zkx14
Duster De-ruster
Hoppy said he was planning to use a 23A 12v battery
Almost done with the rebuild of dash. Just need to clean up numbers and needles on speedo unit and install
Princess Valiant
A.K.A. Rainy Day Auto
at least i know the gauge works on my rally dash for the coronet
Nice !!
Princess Valiant
A.K.A. Rainy Day Auto
also works on the oil gauge, at half the gauge doesn't go to the 12 o clock position because 12 o clock is not half on this gauge 
I am thinking of using air pressure to simulate the oil pressure and complete the loop test
I am thinking of using air pressure to simulate the oil pressure and complete the loop test
also works on the oil gauge, at half the gauge doesn't go to the 12 o clock position because 12 o clock is not half on this gauge
I am thinking of using air pressure to simulate the oil pressure and complete the loop test
Dang, When you gonna Clean them Gauges ??
ops:
Ddaddy
Just doing what I do
Looking sharp Mitch! :thumbup:
ScampMike
Despicable Damn Yankee
hi all... Mitch, that is smokin' hot boss.. real nice attention to detail
ScampMike
Despicable Damn Yankee
so what all is going on? ...well, besides OMR not liking the idea of a black intake, Dave gettin' it done and "moving" on - how's that knee BTW? Rani got a great new avatar..
Princess Valiant
A.K.A. Rainy Day Auto
Plymouth is out to win you over for 67
Last edited by a moderator:
I never said I didn't like the idea. I said it wouldn't work.
Rani changes her avatar Monthly.
Ddaddy
Just doing what I do
The leg is doing ok, a little better. The antibiotic is getting ahead of it (still hurts though).
Rani is turning into a collector of my artwork to match her collection of Mopars. Before long, I suspect I will do one for every Mopar she owns...how cool is that!
Ddaddy
Just doing what I do
Why doesn't it work? I'm just curious because when I replaced the M1 SP on my engine with an Air Gap, they offered me the black one but since I prefer the natural aluminum look, I didn't get it. Is the black one different other than finish?
ScampMike
Despicable Damn Yankee
that you did - same difference for me - I don't like things that don't work..
Strike that comment.
Ddaddy
Just doing what I do
ScampMike
Despicable Damn Yankee
kaaaa-rickets...
Ddaddy
Just doing what I do
Working on a new image for Rani...
Huh.n
I have a t shirt with that.
Somewhere I have some art work with a hemi on it . And B F goodfish on the tires.
-
Similar threads
