Stop in for a cup of coffee

-
Seems pretty comparable to the Painless, just curious as to the big difference in cost.
painless is part paying for the name. they were one of if not the first to offer full harnesses like this but over the last few years, theyve been forced to lower their prices because of competition
 
a couple of years ago I had a 350, a trans and a set of GTA wheels off of a Firebird (87) - kept them and kept them thinking I would put them in/on something - - finally sold and WHAM - there was the car I "needed" on Ebay..... :BangHead: - it never fails
I knew it, see I told you were a chebbie plant
 
LOL - - it was a fun car... started off as an inexpensive daily... slowly morphed into a semi-hot rod (as much as an 87 Firebird can be that is...)
I did a lot of Custom Road Race type work on this one for a Guy..
WIN_20160302_142536 - Copy.JPG
WIN_20160302_142617.JPG
WIN_20160302_142715.JPG
WIN_20160302_142810.JPG
 
well, mine was the "newer" body - being an 87 and all - but I did have a 350 with headers w/better exhaust, a 700R4 with a Corvette servo, subframe connectors and 50 series tires on GTA wheels at all four corners... it went ok
 

well, mine was the "newer" body - being an 87 and all - but I did have a 350 with headers w/better exhaust, a 700R4 with a Corvette servo, subframe connectors and 50 series tires on GTA wheels at all four corners... it went ok
Most cars don't have the wheels at the corners.:poke:

50ca6dadebdb6faa0d7f94fc168aace5.jpg
 
everybody go for nap time or what? I was trying to keep up with the non stop posts all morning. In between looking up parts I need for work
 
-
Back
Top Bottom