Stop in for a cup of coffee

[Tooljunkie]

Well Gents, I am on the road in a few minutes. Will give update where i am when I can. See you all in a few days.

Safe travels!

 

[MOPARMITCH]

 

[MOPARMITCH]

 

[MOPARMITCH]

Trying again

 

[dukeboy440]

Trying again
View attachment 1715195314 View attachment 1715195315 View attachment 1715195316 View attachment 1715195317 View attachment 1715195318 View attachment 1715195319 View attachment 1715195320

that works!!

Looks amazing @GeorgeH . Good job

 

[MOPARMITCH]

Haha, I tried to copy them from the PM.. I guess that don't work. Downloaded them to my car file..

 

[ZMan67S]

I agree @GeorgeH great job!!

 

[MOPARMITCH]

Pretty much!

View attachment 1715195304

Hey !!!! The Frame rails are good !!! FYI Guys... This is only worth doing, on a 68 Numbers GTS BB Car.....

 

[GeorgeH]

Hey !!!! The Frame rails are good !!! FYI Guys... This is only worth doing, on a 68 Numbers GTS BB Car.....

I did have to repair one. Rust hole about the size of a quarter on the left rail. LOL

 

[No name needed]

Pics or it did not happen.

They will only get deleted.
Why bother.

 

[zkx14]

I did have to repair one. Rust hole about the size of a quarter on the left rail. LOL

That's not bad. Did it take one stick of gum or two?

 

[GeorgeH]

That's not bad. Did it take one stick of gum or two?

I packed the rail full of expanding foam to help solidify it and spray bombed over it!

 

[No name needed]

I packed the rail full of expanding foam to help solidify it and spray bombed over it!

If you push some metal washers in with the foam. The magnet will work and nobody will ever know.

 

[GeorgeH]

If you push some metal washers in with the foam. The magnet will work and nobody will ever know.

FANTASTIC IDEAR!!!!!!

 

[GeorgeH]

Gotta roll. I need to grab some sheet metal screws. Laters

 

[zkx14]

Gotta roll. I need to grab a couple road signs and some sheet metal screws. Laters

fixed

 

[Ddaddy]

Home from burying my BIL ashes. Working on the travel posters again.

Montana

 

[Ddaddy]

Massachusetts...

 

[Tooljunkie]

If one more neighbour shows up, im gonna put away my tools and start drinking....

 

[zkx14]

If one more neighbour shows up, im gonna put away my tools and start drinking....

why wait?

 

[toolmanmike]

If one more neighbour shows up, im gonna put away my tools and start drinking....

It's 3:00 on Friday! Start drinking. Neighbors or not.

 

[toolmanmike]

Got my air charged on the Swinger. Might have put a couple oz. too much in. Evap temp gets to 31.5° and the capillary switch shuts the compressor off till 41.5° . Now it works like it has a pressure cycling switch. LOL

 

[No name needed]

If one more neighbour shows up, im gonna put away my tools and start drinking....

Just be standing naked by the door for additional effect.
Keep the tool out.

 

[zkx14]

It's 3:00 on Friday! Start drinking. Neighbors or not.

I can't due to being at work. Don't know why they have a problem with it. lol

 

[Ddaddy]

While I was in the process of searching for more source images in my files for the travel posters, I came across a little postage stamp size old magazine travel image from the mid 60s.

I decided to see what I could do with it. It was pretty badly degraded and pixelated.

Turned out kinda cool I think.