Stop in for a cup of coffee

[halifaxhops]

Well I am out have to do a post office run and no Uber today either!

 

[halifaxhops]

Craig there is a book out I saw at Carlisle for the specific cars has all the part numbers and descriptions wrote it down somewhere. Keefer you saw it that guy in the hoverround had them remember the name of them?

 

[Ben Drinkin]

I think that's Bens Girl......

Why yes, yes it is! She does love her some Ben....

 

[halifaxhops]

Ben there done that?

 

[dukeboy440]

and im back

 

[halifaxhops]

So?

 

[dukeboy440]

So?

i know i know. no one cares haha

 

[zkx14]

Craig there is a book out I saw at Carlisle for the specific cars has all the part numbers and descriptions wrote it down somewhere. Keefer you saw it that guy in the hoverround had them remember the name of them?

Nope.

 

[zkx14]

i know i know. no one cares haha

 

[zkx14]

Why yes, yes it is! She does love her some Ben....

Fantasy vs Reality...

 

[ZMan67S]

AMS has one here is the part number I think.
2661298
Parts Search

I called that was the bezel part number. Part number is 2820408, he didn't have anything new or used. At least I have the number now.

 

[krazykuda]

Hi Mike, Thanks. I will try on my home computer. sgrip65

It helps to resize pictures to 40% for posting...

 

[krazykuda]

I'm not sure, screw it up and I got nothing.

I started out with nothing and still have most of it left....

 

[krazykuda]

Might want to try to blow it out a few times.

Fixed...

TMI...

 

[krazykuda]

Also trying to confirm the two heater hoses for the 67 383 are both 5/8??
That's what I have and someone thought one should be 1/2 inch.
Don't think that change happened until 73??
Ordering a new heater core for it.

I would go with 5/8" for both sides myself whether original or not... The 5/8" will have more flow and more heat for the heater core...

 

[krazykuda]

and im back

 

[zkx14]

It helps to resize pictures to 40% for posting...

I used to resize everything to post. Havent needed to do that lately. Not sure if that is a change on the site, or this if laptop and new phone handle pics differently?

 

[krazykuda]

and im back

I'm front....

 

[krazykuda]

I used to resize everything to post. Havent needed to do that lately. Not sure if that is a change on the site, or this if laptop and new phone handle pics differently?

I'm still stuck in my old habits...

 

[zkx14]

The 5/8" will have more flow and more heat for the heater core...

Not if the nipple is restricted to 1/2"...

 

[krazykuda]

and im back

Thanks for the warning....

 

[krazykuda]

Not if the nipple is restricted to 1/2"...

Can't you change the nipple on the engine to match???

 

[zkx14]

I'm still stuck in my old habits...

I used to take pics bigger than what I wanted and crop to about 2/3. Was easiest way on one phone I had.

 

[zkx14]

Can't you change the nipple on the engine to match???

Probably, but not the tube of the core if that is smaller

 

[zkx14]

Can't you change the nipple on the engine to match???

Plus I think he wants it to look original. If its supposed to be 2 diff sizes someone who knows what it should be would pick that out in a short second.