Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Fixed, to easy
I had a cutomer over Sat. He was blown away by the amount of parts I had That is in the cabinets, told him to peak in the loft. Must have taken 20 pictures!, and is a bigshot with the AACA, said he has three more he wants done.
Morning!
-20°. Cold.
I doubt gopro will step up,as it was a gift to Kim from her employer. It still works, but we will have to get a charger for it. Seems it is a problem where the charge cable melts where it plugs into camera.
-20°. Cold.
I doubt gopro will step up,as it was a gift to Kim from her employer. It still works, but we will have to get a charger for it. Seems it is a problem where the charge cable melts where it plugs into camera.
Morning !
Rich about a year ago I bought a bunch of cores from a old speed shop that was closing. they were all 300-700 each! Not hard on dual points at all especially RB ones now.
This is actually a very good price. Rare on here
This is actually a very good price. Rare on here
Mopar 1964-65 426 Race Hemi Cast Iron Dual Point Distributor OEM 67 W0 R0 WO RO | eBay
The item for sale here is a 1964-65 and 1967 Mopar 426 Race Hemi Dual Point Prestolite Cast Iron Distributor. Fits 1964 Race Hemi, 1965 A990 cars, W0, and R0 1967 cars.
www.ebay.com
Hey don’t tempt me!!
Icetech
Well-Known Member
BTW.. Just so you guys can laugh at me.... took me 90 mins to put one window regulator in yesterday.... turns out when you put them together and put the bottom part on upside down (the part held on with the 4 tang washers and the window bolts to) the rollers fall out when you go up and down 
I was beyond pissed til i figured out what i had done.. Second one will take 10 mins to put in now
I was beyond pissed til i figured out what i had done.. Second one will take 10 mins to put in now 
Always the way it is. 20 min for brake pads on the first side, 5 min on the second side.BTW.. Just so you guys can laugh at me.... took me 90 mins to put one window regulator in yesterday.... turns out when you put them together and put the bottom part on upside down (the part held on with the 4 tang washers and the window bolts to) the rollers fall out when you go up and down
Good Morning Everyone. Worked on the Charger all weekend. Almost finished the front frame section. It will be great when it is a roller again. I hope all is well out there.
Icetech
Well-Known Member
Repairing rust?
Yes and no. Building a full 2x4x3/16 tube frame for it. Then full stock car cage. Going for a mock vintage stock car look. Something a bit rough but solid and just a blast to drive.
No! But it doesn't look like it cares what I want. Likely 10+ by Friday. Out at Marie's house (she is still here) they just got 15 the other day and now another 24-30!!
I drug it out of a junkyard a couple years ago. It had been there since the 80's. It will be fun. I have a big block and 4spd for it. Frame is done from windshield back.
Icetech
Well-Known Member
Should be fun to drive
Wish i had a 4 or 5 speed in mine but not gonna convert cause... lazy 
Unconventional
Well-Known Member
It's More Door Monday!
Good morning
Good morning
I have a 4spd OD trans, bellhousing and flywheel, but it things don't fit they way I want them to, then I have an auto as well. It will be whatever makes sense at that timeShould be fun to drive
Guess i should get after it. Cut out bed floor today i think. May keep it in shop until i get the door skins for firebird.
NOS 426 HEMI IGNITION BOX, RARE - auto parts - by owner - vehicle...
PHONE CALLS ONLY 4eight4+223+six485 NOS 426 Hemi factory ignition box. Prestolite model 250. These were used in the RO /WO factory HEMI CARS. This is probably only NOS and finest package left in...
baltimore.craigslist.org
and 450 for the right vac advance. 6 month only one
Mopar 1971 440 six pack new old stock distributor - auto parts - by...
Part number 3438578 correct for manual transmission as well as automatics.
portland.craigslist.org
- Joined
- Mar 17, 2018
- Messages
- 17,239
- Reaction score
- 42,204
Well we got the counter tops in place and replumbed. First pix is counter top prepared for transport. Then in place. We still have to paint all the cabinet doors yet and mount them. I am pretty sure we will get the apartment done just in time to move into the big house! The plywood counter tops served us well! Man this butcher block was heavy going up stairs!
How much you want to put my cage in my dart?
-
Similar threads
