Stop in for a cup of coffee

[WV64Signet]

Rubber band

In a pinch maybe. The o-rings I bought are perfect size. Works like a champ

 

[WV64Signet]

I get the ethanol free stuff in Martinsburg, only one near me.

Most all the Liberty stations here have it.

 

[Icetech]

Is there any reason to cut the ridge if you aren't pulling pistons?

 

[dukeboy440]

Is there any reason to cut the ridge if you aren't pulling pistons?

Do it right or do it twice

 

[WV64Signet]

Is there any reason to cut the ridge if you aren't pulling pistons?

I am pulling.... the pistons..


Otherwise I don't think it'd matter???

I mean, if you know you're going to over bore and not reuse the pistons you COULD just hammer them out.

 

[Icetech]

Do it right or do it twice

i'm just swaping heads on mine.. has maybe a .030 ridge or less, wasn't too worried bout it

 

[Icetech]

I am pulling.... the pistons..


Otherwise I don't think it'd matter???

yeah.. i'm not pullin mine but have a ridge is why i was curious

 

[WV64Signet]

yeah.. i'm not pullin mine but have a ridge is why i was curious

I'm not engine smart so don't take my word

 

[Frodee]

I'm a ....

1. Read provided instructions
2. Go online and read reviews and pick up tips
3. Find youtube videos of tool in use
4. Reread instructions
5. Conduct practice/ simulation of tool operation
6. Execute initial pilot...
7. After action review
8. Adjust/ modify approach
9. Begin actual use

What? you trying to make the rest of us look bad.
Always throw the instructions away It's our manly duty to figure it out ourselves.

 

[dukeboy440]

I'm a ....

1. Read provided instructions
2. Go online and read reviews and pick up tips
3. Find youtube videos of tool in use
4. Reread instructions
5. Conduct practice/ simulation of tool operation
6. Execute initial pilot...
7. After action review
8. Adjust/ modify approach
9. Begin actual use

I usually start at number 9

 

[No name needed]

Rubber band.

 

[zkx14]

Burgers and fries was good.

 

[WV64Signet]

View attachment 1716092747

And back to the Spinners

 

[No name needed]

And back to the Spinners

Hoppy is the go to man for that,he posted he dated a few.
@halifaxhops

 

[No name needed]

And back to the Spinners

I actually have that shirt I am having a few made in grey.
As requested by a couple members here.
The back will read Wolfies Rubber band fair well tour Carlisle 2023.

 

[No name needed]

Burgers and fries was good.

View attachment 1716092748

Looks great except for that green whatever.

 

[Icetech]

And back to the Spinners

I know you guys are pokin fun, some of you but i love the spinners

 

[No name needed]

I know you guys are pokin fun, some of you but i love the spinners

It's always in fun.

 

[zkx14]

Looks great except for that green whatever.

That would be avocado. Guac without the other ingredients. LOL

 

[MomsDuster]

One of the best parts of this thread is all the clowning around.

 

[dukeboy440]

One of the best parts of this thread is all the clowning around.

Hey! You went roller cam didn’t you?

 

[WV64Signet]

Didn't pay much attention to the label. It was just a new one at the beer store

 

[toolmanmike]

Didn't pay much attention to the label. It was just a new one at the beer store

View attachment 1716092768

I'm not a huge IPA fan but I enjoy one occasionally. I like a few sours as well just not a steady diet. My go to is dark ales and stouts.

 

[ZMan67S]

If the OP did what most of us men do,then. If all else fails read and follow the instructions.
Sort of like Christmas Day assembling the toys .

I usually looked at the picture on the box and went for it.

 

[MomsDuster]

Hey! You went roller cam didn’t you?

No, I looked into it, but decided it was beyond my budget at the time. Went with the Xe275hl and never looked back.