Stop in for a cup of coffee

-
A drip off the tip??? I'm amazed by this revelation?
Must tell one, while working as a temp in the Bosch plant. Attending/witneesing a robot squirt 2 a part gel in backside of antilock brake proceesors. When the robot would rwturn/park at its home position a last drop of gel fell on a crossing piece of their aluminum unistruck framing.
Brother walks by with something like "having fun yet?"
I say hey bro, look at this mess.
He says OK, I looked at it. What's the problem?
Me, "you raised 3 boys. Go into its program and teach it to shake it off!"
Without a word he walked away. He knew he had no clue how to alter the program. I do, or did at that time in my life. Was just X and Y and Z to me.
 
So come home from Hershey, There is the dog out front WTF we left you in the house. Go inside all of the plants that were on the window sills are broken on the floor, no busted windows. Freaking dog Chewed the knob on the back door and opened it to get out. WTF she is Houdoggie! Serious issues about being left alone!
Have you tried leaving the radio or TV on? Probably have but worked for one of our kids.
 
Cool

I'm a Patriots fan from childhood. My first sports team sweatshirt was a Pats shirt at about age 5.

I've gone from the sorry days of the 70s and 80s to the high times of Brady. Most people hate the success... now that the success is over, most people hate the fan base. Understandable.

Yankees Suck is the standard.
Team owner Green Bay Packers! But I have lost most interest in NFL over the last few years due to kneeling incident. Once hockey season starts I am done!
 
Shelley got a GFOA Excellence in Financial Reporting award again this year. Check it out at the 2:15 mark in the Board meeting video.
 
Working on wiring, mounting bracket for coil needed modifying as its larger than original. The coil that was hanging on it,24 volt, how did it even run?? Oh well, back at it. Right after i finish my coffee..
 
I think I'll pull the wheel on that old column I got from Jeff and dig out the turn signal switch. It operates like it is in good shape. I won't know how good until I plug it in.
 
$37 worth of LED lightbulbs later___ I have a clamp and lamp with reflector on the book shelf next to the computer desk. 100W incandescent is nice but been getting toasty earlier this week. So, I change it out for an LED. what happens now? it's cooler in here then when the A/C is on during the summer! just about the time I decide to change the bulb, it'll warm up again. Visited a friend at work today. He and his son are pulling the 440 out of his 68 GTX in anticipation of installing his already built short block 426 HEMI. can't wait to here/see this done! 4-speed with 4.10 Dana. gonna have some big roller cam he bought decades ago.
 
I think I'll pull the wheel on that old column I got from Jeff and dig out the turn signal switch. It operates like it is in good shape. I won't know how good until I plug it in.
It's spanking me all the way. Damn old cars. I can't get the terminals released from the connector so I can pull the harness out of the column. I am about ready to snip the wires and butt connector them back together when I need to.

turn signal switch removal.jpg


turn signal switch removal.jpg3.jpg


turn signal switch removal.jpg4.jpg


turn signal switch removal.jpg5.jpg
 

It's spanking me all the way. Damn old cars. I can't get the terminals released from the connector so I can pull the harness out of the column. I am about ready to snip the wires and butt connector them back together when I need to.
You don't have the pin release tool???
 
You don't have the pin release tool???
I got them. I had to modify the tool to get it down inside the connector body far enough. And, the release tabs (yes, 2) are on each side of the connector. I was trying to release a tab that is on the back that appears to be a guide so the connectors can only go in 1 way.

turn signal switch removal.jpg2a.jpg


Twin Lock terminals.png
 
Last edited:
-
Back
Top Bottom