Supercharged 6.4L in a 64 Valiant

[Chuckbizkits]

Using a protractor I got the engine at the desired angle and fabricated the transmission mount. I discarded the massive, unusable factory mount.

Here's a view of the exhaust cut-outs.

 

[Chuckbizkits]

New Trans mount.

 

[jw97neon]

wow this thing is moving right along. looking great.

 

[Chuckbizkits]

Finished the transmission hump. The little box with the hole is for the factory shifter cable.

 

[Chuckbizkits]

Planning on doing a few body mods. Among them, going to do some exhaust cut-outs on the and recess the Lic Plate a little on the rear valance.

Made the cuts with cut off saw.

 

[Chuckbizkits]

 

[Chuckbizkits]

Used some round tubing to fill in the cut-outs.

 

[Chuckbizkits]

Cut around the edge, pressed in and welded up the Lic. Plate area.

 

[Chuckbizkits]

Welded up and ground down the weld on the exhaust cut outs.

 

[rapidtransitric]

Looks good

 

[HemiDenny]

nice work....I like your "no give in" attitude.

 

[Chuckbizkits]

nice work....I like your "no give in" attitude.

Ha! Thanks!

 

[Chuckbizkits]

Some filler and primer on the rear valance.

 

[Chuckbizkits]

Removed the dash. This is my first Mopar project. They make it real easy to remove. No spot welds, ... . Can do the mods on the back bench.

Going to completely redo the gauges and switches.

 

[Tincup]

Nice Job......

 

[Buschi340]

you have bunch of cool machinery in your Garage

 

[Chuckbizkits]

you have bunch of cool machinery in your Garage

I'd trade it all for just a little more.

 

[Chuckbizkits]

Nice Job......

Thanks Tincup. Don't look too close, a few of your ideas were enviously stolen.

 

[Chuckbizkits]

Going to run Auto Meter Sport Comp gauges. 5" GPS Speedo, 5" Tach, 2 5/8" on lower part and a couple of 2 1/16" on top.

 

[magnummopar]

Your floor is too clean, your making the rest of us look bad....nice work btw!

 

[Chuckbizkits]

Your floor is too clean, your making the rest of us look bad....nice work btw!

Don't look too close!

 

[Chuckbizkits]

Filled and primed. Test fit.

 

[Chuckbizkits]

Gauges came in from Summit.

 

[momoparman]

Yum.

 

[Buschi340]

side question: doaes Autometer do the odometer in metric and gps?