Sweptline Serpentine

[Mopar Sam]

Any updates ??

I've been busy tending the coffee pot. But I've been thinkin' on it..

 

[318willrun]

I've been busy tending the coffee pot. But I've been thinkin' on it..

Luv it !

 

[Mopar Sam]

Any updates ??

I found a small piece of 1/2" aluminum diamond plate and whittled out a crude top bracket. I also band sawed a different Magnum bracket. It is getting closer to looking like I want.

 

[318willrun]

I found a small piece of 1/2" aluminum diamond plate and whittled out a crude top bracket. I also band sawed a different Magnum bracket. It is getting closer to looking like I want.
View attachment 1715870437 View attachment 1715870438


View attachment 1715870439

you'll need to patent that..... you are sitting on a gold mine

 

[Mopar Sam]

I am just about to call this done. I still have a little to do on it, but not much. I did add an idler pulley. It turned out looking better than I thought it would.

 

[oldkimmer]

Looks great. Kim

 

[replicaracer43]

It's not gonna work very good with that right hand tensioner, you should ONLY have a tensioner on the trailing side.

 

[318willrun]

I am just about to call this done. I still have a little to do on it, but not much. I did add an idler pulley. It turned out looking better than I thought it would.


View attachment 1715881762

I'm having a hard time looking at the belt with that B body in the back ground......

 

[Mopar Sam]

Old thread, but in the next day or two, I'll be measuring for the belt length.

I found this belt look up by length from Dayco. I thought it may help somebody out. I am gonna try it.

https://na.daycoaftermarket.com/en/catalog/#serpentine-belts