72ScampTramp
Scamp Tramp
I did a mini tub on my Scamp and had to peal the old brackets off for the e brake where the lines to the back wheels meet up with the lines coming from the front. Anyone happen to know the size of the hole in the bracket
The bracket for e brake
- Thread starter 72ScampTramp
- Start date
-
pettybludart
Well-Known Member
Josh,when I did my minitub I also cut off the brackets.I just rewelded them back in place.Just make sure you place them correct for rearend travel(up/down)
72ScampTramp
Scamp Tramp
Josh,when I did my minitub I also cut off the brackets.I just rewelded them back in place.Just make sure you place them correct for rearend travel(up/down)
You know when I did the mini tub Scott I did have the idea on saving them. But I mangled them so bad removing them. However I made some new ones out of angle iron. I was just looking for the hole size. But thinking i better measure the line coming in from the front that should tell me what size i need the holes. Did you put yours in with the rear end dangleing or with the weight on the suspension?
-
