Feb 24, 2017 #1 abodyjoe Well-Known Member Joined May 22, 2004 Messages 25,573 Reaction score 16,038 Location Berlin,N.J. 08009 what is a the application for this carb?
Feb 24, 2017 #2 abodyjoe Well-Known Member Joined May 22, 2004 Messages 25,573 Reaction score 16,038 Location Berlin,N.J. 08009 one site says 9247 79 440 Truck AT dos that sound right? whats the "S" at the end mean?
Feb 24, 2017 #3 rumblefish360 I have escaped the EVIL Empire State! FABO Gold Member Joined Jun 21, 2005 Messages 50,508 Reaction score 24,689 Location Florida I think they all have an "S" on them. Did you use the "Vannth" guide?
Feb 24, 2017 #4 abodyjoe Well-Known Member Joined May 22, 2004 Messages 25,573 Reaction score 16,038 Location Berlin,N.J. 08009 no where is that? i knw there was a sit but don't remember where it is.
Feb 24, 2017 #5 bbrroowwnn never re member Joined Nov 27, 2010 Messages 12,466 Reaction score 809 Location Drums, PA 79 440 Truck AT that is correct
Feb 24, 2017 #6 lemondana BlackDart Joined Dec 7, 2007 Messages 1,784 Reaction score 1,980 Location Southeast NE Most 440 truck TQ's are good to use. They have minimal emissions stuff on them, no lean burn. I have found that they are jetted a little larger on the primary side and smaller on the secondary side, but otherwise good carbs to use.
Most 440 truck TQ's are good to use. They have minimal emissions stuff on them, no lean burn. I have found that they are jetted a little larger on the primary side and smaller on the secondary side, but otherwise good carbs to use.