track test on RMS control arms and strut rods. latest mopar enthusiast magazine..

-

abodyjoe

Well-Known Member
Joined
May 22, 2004
Messages
24,274
Reaction score
13,495
Location
Berlin,N.J. 08009
pretty big gain. put some poly bushings in the lower arms and i'll bet it frees it up even more. a friend put the upper arms and strut rods on his hemi runner and i couldn't believe how easy the suspension mover up and down.


its free to read. just have to put an email address in. i use a yahoo address for thaqt type of thing..

http://editions.amospublishing.com/...1&f=1&id=2467b5c0-b5bf-4349-b321-f2bc06e53407










.
 
I have to think there was some "spring rate" built into the factory bushings. Removing all the friction and not changing the spring rate/roll couple probably doesn't work too well though.
 
Nope.

Company in from out of town, otherwise I would have. Been super busy besides, haven't been thinking about the car too much, but it is ready for the season as I have been driving it to work once a week again.
 
-
Back
Top