[WANTED] TRW PUMP

[273 ball]

Hi looking for a TRW power steering pump for a 67 barracuda with the cap and pulley

273 ball

 

[randys4406]

Hi looking for a TRW power steering pump for a 67 barracuda with the cap and pulley

273 ball

Still need one?

 

[273 ball]

Hi still looking for one that is complete with cap and
Pulley

273 ball

 

[RedFish]

Beats me. All 3 of the 67 model 273 I own or owned have oval neck Federal pumps mounted to cast iron water pumps. I have a different complete pump here that was on a 68 318 when I bought that car. It's belt didn't line up right ( same water pump ). I have no clue what brand, what it fits, etc... Its worthless to me though. Pics etc.. if you're interested.
edit; I clicked the hyper link above which took me to a Ebay listing. The odd/extra pump I have does look like that pic.

 

[694spd]

PM sent.....

 

[Sedanman]

Like this?

 

[273 ball]

Hi Dose it line up with the pulley ,
273 ball

 

[RedFish]

The pump shown by Sedanman should line up perfectly if on the cast iron water pump.
Warnings; Cracking the return tube on the reservoir during the rebuild process can happen. The "how to" videos found on YouTube never mention this.
This pumps belt cutting through a short lower radiator hose happens too. If that hose isn't Gates, came from Advance, etc.., don't push it up onto the water pump further than it takes to get a clamp on. Gates hose can be pushed fully to the stop cast on the water pump.

 

[694spd]

The pump above is a Saginaw pump.

 

[pishta]

^^^ didnt know^^^^Whats the application difference, just different supplier? Looks 1:1 compatible.

 

[RedFish]

Ok Maybe it is Saginaw. Until I go to the basement, get the number from the rebuild kit, and cross reference that number, I cant be sure. My memory sux. I felt confident that TRW wasn't correct for the oval neck reservoir pump belonging to 67 273 ( the one that Sedanman posted ).

 

[RedFish]

Confirmed the correct pump is a Saggynaw. Edelmann kit number is 7910

 

[273 ball]

sold ,found