What cam?

[plumcrazeman]

What cam should i go with? 340 J heads ported & polished. Light weight pistons 30 over.323 rear but might change to 391. 2500 stall speed.torker 2 intake.Thanks for your help.

 

[crackedback]

Street driver, hard to beat the XE268H or smaller Lunati Voodoo grinds

 

[ramcharger]

What compression are you running? What's your intended use?

If you're daily driving, go with this cam:
http://www.lunatipower.com/Product.aspx?id=1544&gid=287

If you're cruising on the weekends and want to hit the strip, go with this grind: http://www.lunatipower.com/Product.aspx?id=1545&gid=287

 

[stroked 340]

Ramcharger..excellent choices..

 

[plumcrazeman]

Thanks ramchager i will go with this cam:
http://www.lunatipower.com/Product.aspx?id=1544&gid=287
I have a solid cam in the engin now,witch is to big for a small block & the 488 with 4000 stall not much fun any more on the street.

 

[ramcharger]

Ramcharger..excellent choices..

Thanks.

Thanks ramchager i will go with this cam:
http://www.lunatipower.com/Product.aspx?id=1544&gid=287
I have a solid cam in the engin now,witch is to big for a small block & the 488 with 4000 stall not much fun any more on the street.

You'll like it and it should be quite streetable. It'll still produce a bunch of mid-range torque too.