Yote
Well-Known Member
Now that I can post pics I'll ask again. What is this connection for? It's above drivers kick panel. Also shown is its "parking" spot if it's not being used, just above key in ignition buzzer.
Yote
What is this for ?
- Thread starter Yote
- Start date
-
Now that I can post pics I'll ask again. What is this connection for? It's above drivers kick panel. Also shown is its "parking" spot if it's not being used, just above key in ignition buzzer.
Yote
jlhunsinger
Active Member
Where does it lead from either end?..aka parking spot and connector
mguner
How many is too many?
Some models had a light on buzzer option but most of those are black wires..... Looks like a seat belt buzzer connector.
Yote
Well-Known Member
"Parking " spot is just that, no wires or terminals. Connector wires lead into harness, from there I don't know.
Yote
Yote
mguner
How many is too many?
The empty shell stuck above the relay looks like the seat belt buzzer housing. I bet if you pull it down it will have a part# to verify this.
Yote
Well-Known Member
Don't really need a buzzer, but would a jumper wire between those two terminals at least operate my seat belt light? Don't have seat weight sensors , just switch in seat belt retractors.
Yote
Yote
Mopar92
Well-Known Member
Seat belt buzzer.
Mopar92
Well-Known Member
That plug with purple wires on my 73 duster is a seat belt buzzer.
-
