What kind of dope do you use

[Denvermike]

What do you all use on the exhaust studs on the ends that go into the coolant passages?
Thanks,
Mike

 

[plumkrazee70]

What do you all use on the exhaust studs on the ends that go into the coolant passages?
Thanks,
Mike

here is what I used. Works great. Should be able find it at your local parts store.

http://www.permatex.com/products-2/...rmatex-high-performance-thread-sealant-detail

 

[zkx14]

Stuff I used is Permatex, almost same as that one, but 'high temp' rated to 400 instead of 300. ( on slant, they all hit water)

here is what I used. Works great. Should be able find it at your local parts store.

http://www.permatex.com/products-2/...rmatex-high-performance-thread-sealant-detail

 

[tekslk]

Ive just used the red high temp silicone and it works great on exshaust and headers.

 

[69 Cuda 440]

Permatex #80045

No Mess, No Waste, No Leaks, No Problem.

{Range..... -65* to +400*}

 

[hemi446]

I use #2 Permatex it stays soft so it expands & contracts with the metal surfaces no more leaks

 

[Woods74]

The Sasquatch kush. :happy1:

 

[skrews]

here is what I used. Works great. Should be able find it at your local parts store.

http://www.permatex.com/products-2/...rmatex-high-performance-thread-sealant-detail

^ This by far one of the best thread sealants out there.

 

[RustyRatRod]

Maui.

 

[jimjimjimmy]

beach point seaweed

 

[TrailBeast]

"What kind of dope do you use"





Home grown

 

[44070dart]

whoa man ..I thought you were asking what kind of ...... never mind NSA may be looking

 

[dirty white boy]

What kind of dope do you use ...OG kush

 

[silvadful]

"What kind of dope do you use"





Home grown

:sign3:.

 

[racerhog]

I use this stuff.....
http://paceperformance.com/i-5133797-12346004-gm-teflon-pipe-thread-sealant-1-69-oz-tube.html

 

[MobileCustoms]

Permatex Ultra Copper Maximum Temperature RTV

Good for 700 degrees, works great!

http://www.permatex.com/products-2/...-temperature-rtv-silicone-gasket-maker-detail
http://www.permatex.com/products-2/...cone-gasket-maker-detail#sthash.E5hpr152.dpuf

 

[krazykuda]

Northern California Sensimillia.... :headbang:

 

[krazykuda]

for sealing engine water jacket leaks, I use the silver powder "world's greates sealer".