What timing cover are you using with a 7.3 inch damper

[Dana67Dart]

mine fit balancer # 64277

are the highlighted marks dirt on the balancer or is the metal cracking? The 2 up and down lines seem to have been there out of the box

A

 

[Michael Siple]

are the highlighted marks dirt on the balancer or is the metal cracking? The 2 up and down lines seem to have been there out of the box

View attachment 1716353417
A

no cracks - thinking that was from timing tape that didn't stay.

 

[fat-360]

View attachment 1716353217mine fit balancer # 64277

View attachment 1716353218

Thanks mate, that does look like a different model than mine( mines only the nodular iron one) but same diameter.
Thanks again. Looks great.

 

[fat-360]

no cracks - thinking that was from timing tape that didn't stay.

Micheal is there any chance you could please take a picture from the other side of the timing case so I could see how far the balancer is from the front seal?

 

[Michael Siple]

Micheal is there any chance you could please take a picture from the other side of the timing case so I could see how far the balancer is from the front seal?

I've come up empty for pics of other side