Where do these clips go?

[1MeanA]

The bag was labelled rad support but I’m not sure what they hold.

 

[str12-340]

firewall pinch weld - see above blower motor holding vacuum lines for AC style heater control valve - 1970 Dart

 

[1MeanA]

firewall pinch weld - see above blower motor holding vacuum lines for AC style heater control valve - 1970 DartView attachment 1716425260

No ac or heater control valve but maybe they are for firewall and not rad support

 

[str12-340]

used on radiator support too to hold wires

 

[1MeanA]

used on radiator support too to hold wires

I’ll have to figure out where they go. The main Harnois of course held by the permanent tabs that run along the top.

 

[str12-340]

those clips shown here used on inside of radiator support for horn and parking light wires - location indicated by small recess in the lip it clips to

 

[1MeanA]

those clips shown here used on inside of radiator support for horn and parking light wires - location indicated by small recess in the lip it clips to

Thanks!