who has ported aluminum heads for 360 Magnum block

-

moparcolt

Member
Joined
Jun 24, 2005
Messages
21
Reaction score
0
Location
Huntsburg,OHIO
I am building a 360 for a dart street strip car, it has a 360 /380HP magnum shortblock, M1 single plane, and a 600 lift Hydraulic Roller cam, who has a set of good ported heads for this type of combo?

Would take a used set if there are any out there for sale
 
Might get a faster response by posting in parts wanted forum.
 
I am building a 360 for a dart street strip car, it has a 360 /380HP magnum shortblock, M1 single plane, and a 600 lift Hydraulic Roller cam, who has a set of good ported heads for this type of combo?

Would take a used set if there are any out there for sale

Do they have to be aluminum?
 
I am building a 360 for a dart street strip car, it has a 360 /380HP magnum shortblock, M1 single plane, and a 600 lift Hydraulic Roller cam, who has a set of good ported heads for this type of combo?

Would take a used set if there are any out there for sale

MoPar Muscle has done it in the past. Brian @ IMM I bed e has posted something about this.

There are a few guys closer to you for cheaper shipping considerations though it is a savings of peanuts in the over all picture.

Do you have a set of heads currently or looking to get away from factory iron?
 
A few posted the old Aluminum Commando heads,a while back. Way crude casting wise,Can flow,with enough coin to back it........
 
-
Back
Top