Windshield Pillars?

[coalman]

On a 66 Dart GT, what inside pillar moldings are interchangeable from previous years? Thanks

 

[Mopar Tim]

To be exact, only 66 will be exact, they are plastic. Now will fit, sort of, 64 and 65 Abody. These years are steel. I have a steel set that I will be using, don't know how they will work out yet. The 66 ones seem to be a dream to find not busted up.

 

[coalman]

Are you going to use your metal ones on a 66??? There is a bone yard not too far from here that looks like they have a 65 with them intact. Thanks for your reply...

 

[Mopar Tim]

Are you going to use your metal ones on a 66??? There is a bone yard not too far from here that looks like they have a 65 with them intact. Thanks for your reply...

I am going to use the metal ones on my 66. If I was you, I would get those while you can. I think the ends, by the dash are different, plastic covers more. BUT im still going to use them because I have not been able to locate a good set of 66 pillar covers.

 

[chryslerfat]

To be exact, only 66 will be exact, they are plastic. Now will fit, sort of, 64 and 65 Abody. These years are steel. I have a steel set that I will be using, don't know how they will work out yet. The 66 ones seem to be a dream to find not busted up.

65 and 66 are plastic. 63 and 64 are steel. Steel ones need the rubber piece at the bottom that locks into the dash.

 

[Mopar Tim]

65 and 66 are plastic. 63 and 64 are steel. Steel ones need the rubber piece at the bottom that locks into the dash.

I am going to make a set using fiberglass. The end pieces The 65's I looked at had steel. That is good info, but still made out of unobtainium. Thanks:cheers:

 

[coalman]

Unobtainium, now that is a good one!!!!