The economics discussion is going on in the political forum. It's always heated, and it's always pointed. Bring your thick skin, and jump into the fray.
would this pass chassis certification?
- Thread starter hw612
- Start date
-
The economics discussion is going on in the political forum. It's always heated, and it's always pointed. Bring your thick skin, and jump into the fray.
bOb shingler
Well-Known Member
ok, getting back to the original question, yes it will pass tech. no where in the rule does it say that the roll bar has to look like the pic in the nhra rule book. as long as he builds the cage like the rule explains his pic will pass tech, period
hw612
The Mopar Martian.
thank you
bOb shingler
Well-Known Member
you're welcome!
Direct quote from the rule book
------------------------------------------------------
"Crossbar and rear braces must be welded to main hoop."
------------------------------------------------------
Now it doesn't say both sides need to be welded....
Best to call the tech director in your region and ask.
------------------------------------------------------
"Crossbar and rear braces must be welded to main hoop."
------------------------------------------------------
Now it doesn't say both sides need to be welded....
Best to call the tech director in your region and ask.
hw612
The Mopar Martian.
it also dosent say where on the main hoop, up, down. sideways, diagonal.
Yes it does... you need to read the entire section. There are areas the crossbar MUST be located within.
Guitar Jones
aka Angry Johnny
It will not pass tech. In fact a 6 point bar is not legal, it has to have the diagonal braces to the frame.
As for street racing, all I can say is you can't fix stupid.
As for street racing, all I can say is you can't fix stupid.
moper
Well-Known Member
yup
And I street raced for years. The closest track is $100 in fuel and almost 3hrs one way away. It's still the place to race.
-
Similar threads
