WTB motor/engine mounts

[Princess Valiant]

looking for small block engine/motor mounts ........for 318/340 into a pre-72 pad type mounts.......seller must take paypal since there is no way i can send a money order or check right now ....i will pay the paypal fees.

 

[woody30]

I have a set from a 318 69 Barracuda. I'll PM you.

 

[barracudakid]

i have the steel brackets and new rubber pads.
pm me

 

[Moparparts]

Do you need for a 340 or 318? One side is different for a 340.

 

[Princess Valiant]

Do you need for a 340 or 318? One side is different for a 340.

actually putting two cars together ....one is a 340 and the other is actually a 360......so i was thinking that either will work on the 360 without shimming it so i was going to put the 318 ones on the 360 and the if i found the 340 ones, then those on the 340.

 

[Dodge33]

actually putting two cars together ....one is a 340 and the other is actually a 360......so i was thinking that either will work on the 360 without shimming it so i was going to put the 318 ones on the 360 and the if i found the 340 ones, then those on the 340.

The 340-360 pad style engine bracket's are the same, left and right
side's. The 318 passenger side motor bracket will bolt right up. (only A-body
bracket's). The 318 Driver's side motor bracket will work, but you will
need the use of a spacer, for this side. I hope this make's sense to you.
Good luck.

 

[a1972dartswinge]

I have THREE pairs of A body 340/360 brackets for Pad style K-members, I want $60.00/set, shipping included. They have the "skinnier" driver side bracket so they will bolt right up to the ears. Send me a PM if you want a set.

 

[a1972dartswinge]

273/318 brackets are the SAME on the passenger side, but the driver side is wider and has one ear hole in the wrong spot. I made my own driver side out of a 318 bracket for my 360 into my 72 dart. I used a Truck 360 bracket and cut it out and rounded the edges as my "spacer ear". Bolted up and sat in the engine bay like it was meant to be there.

 

[gregpurcell]

To echo all that's said above: If you are running a 340 and a 360 you need 340/360 mounts, not 273/318 mounts. Shimming won't work. There is an ear missing.

 

[a1972dartswinge]

I added an ear and shimmed at the same time.