Your 340 exhaust tipsss

[Snake]

Well I just got my 69 340 ehaust tips today:cheers: I want to get them in the right spot,not to far in or not to far out from my bumper.So could someone with a 69 Dart pop a pic up so I can get a good look.Many thankssssss:toothy10:

 

[MoparLvr]

Hope this helps SSSnake!! I can take some close ups if you need.

 

[Snake]

Hope this helps SSSnake!! I can take some close ups if you need.

Yessss close up in deed,ps nice Dart,so org.

 

[MoparLvr]

Okay I'm bored and took a couple more shots for ya!! These are original tips in the original position.

 

[MoparLvr]

Yessss close up in deed,ps nice Dart,so org.

Lol. I must have been typing when you were typing. Thanks I like your Dart as well. Colour is great.

 

[Snake]

Lol. I must have been typing when you were typing. Thanks I like your Dart as well. Colour is great.

Thoes pics are perfect thanksss for taking the time,glad you were board lol.I also was hopeing for chrome hangers so my plan now is to paint them my body colour.Thanks bro.

 

[Longgone]

I found that if you use the factory hangers (bolted to the proper place on the frame rail) and the tips are factory size/specs you can slide them in until they bottom out which leaves about an inch protruding beyond the bumper. When I restored my 68 GTS I found NOS tailpipes for it and they fit perfectly at this position.

 

[Snake]

I found that if you use the factory hangers (bolted to the proper place on the frame rail) and the tips are factory size/specs you can slide them in until they bottom out which leaves about an inch protruding beyond the bumper. When I restored my 68 GTS I found NOS tailpipes for it and they fit perfectly at this position.

sweet i do have the right hangers.

 

[Rob R]

Mine has NOS tailpipes and hangers...not the best picture...

 

[dustoff440]

Are these tips also correct for a 70 Dart?

 

[Snake]

Thankssss guys thoes pics have been helpfull,I am sure i will like them over the old ones that are not right for the car.I do not have the fasteners tho any sudgestions on what to use,say from a hardware store?

 

[Longgone]

http://www.jacksautoparts.com/catalog/exhaust.html has them. The ones pictured are not A-body but basically the same thing with the hanger insulator at 90 degrees.

 

[Snake]

http://www.jacksautoparts.com/catalog/exhaust.html has them. The ones pictured are not A-body but basically the same thing with the hanger insulator at 90 degrees.

Thanks,I have the hangers not the fasteners that bolt to the frame.