2019 summer race.... Jadaharabi vs 318willrun

who's got this race ?

  • J par - hard to beat a guy that has 4 of everything

    Votes: 6 12.5%

  • Jadaharabi - are you kidding me? this guy is working on a stock eliminator

    Votes: 23 47.9%

  • 318willrun - no plan, other than brain cramps thinking of one

    Votes: 19 39.6%
  • Total voters
    48
-
318willrun said:
well, I don't have a wood burner. My house is natural gas. But, I may put a small wood burner in the garage ….. when it's finally built.... LOL
Click to expand...

My furnace is electric... It sucks. The first 4 years I lived here, other than a 10 minute run to make sure my furnace worked it was never used. This last year I slacked off on firewood... Big mistake. Power bill went from around $140 a month to about $450...
 
j par said:
So I'm pretty sure I remember you saying you have a magnum intake, but have you ever drilled a magnum head for an la Intake?
Click to expand...

I have not drilled any mag heads yet..
But I have 3 sets that if not cracked I will drill. Any that are cracked will be my ginny pigs for building a drilling fixture.
 
j par said:
So I'm pretty sure I remember you saying you have a magnum intake, but have you ever drilled a magnum head for an la Intake?
Click to expand...
You are correct, I have a magnum bolt pattern intake. No, I haven't drilled any magnum heads to accept the LA intake. All my builds have always been LA motors. The 318 mag I have on the engine stand has been there at least 4 years. I've owned several magnums in their factory vehicles, but I have yet to do the magnum swap. It will happen though, someday, ...... maybe... LOL. I have the roller cams with fuel pump snout, I have the intake, I have the 360 oil pans and pick ups, but just haven't got around to it.
 
j par said:
So I'm pretty sure I remember you saying you have a magnum intake, but have you ever drilled a magnum head for an la Intake?
Click to expand...
I did get more paint for the front slots. :) I'll weigh up the difference in the wheel/tire swap. Rolling weight is the best weight so shave... :D
 
Found everything in the trunk of the dart that I left in it when I parked it in the garage.


15580537712001577190209.jpg
1558053807045-201042687.jpg
 
Dave 74 Dart said:
6-71 blower...tunnel ram...???
Whoops, the picts didn't show up on my screen by the time I wrote this !
Click to expand...

Everything that you see in the picture is what was in it when I put it in the garage.
I pretty much never load up the trunks with parts and pieces.

kgip2k said:
That's not a Dart... That's a Dart Sport...
Click to expand...

Always thought a dart sport was a Dodge Dart anyway. That's not just any Dart sport that's a V8, Spirit of 76 Dart sport.

And when I say that's not just any Dart sport Spirit of 76 it's because Rob wolf of mopar collector's guide said it's the only V8 that he's ever heard of.
But I have seen others, one was even a factory 360 Spirit of 76.
 
Last edited:
I had a 72 Dodge Demon, dad always called it a Duster. I corrected him one time, and I got corrected right after. The Duster was first, and that car was pretty much a dodge version of it.
 
The Bundys family Dodge actually appears to be a 1972 Plymouth Duster with an optional vinyl top. Therefore it's funny to hear Al say in 0917: "I don't want a Plymouth, Peg, I want my Dodge, dagnabbit!" Plymouth and Dodge are both owned by Chrysler, and both companies have models originally based on the Valiant.Apr 17, 2006
 
Jadaharabi said:
The Bundys family Dodge actually appears to be a 1972 Plymouth Duster with an optional vinyl top. Therefore it's funny to hear Al say in 0917: "I don't want a Plymouth, Peg, I want my Dodge, dagnabbit!" Plymouth and Dodge are both owned by Chrysler, and both companies have models originally based on the Valiant.Apr 17, 2006
Click to expand...

Conspiracy... Lol...
 
He had a brown duster that he called the the Dodge for sometime and then one day he washed it and remembered it was read LOL
I remember going to a car wash with my 72 when it was still a faded yellow and the guy said hey it's an Al Bundy mobile...
 
318willrun said:
You are correct, I have a magnum bolt pattern intake. No, I haven't drilled any magnum heads to accept the LA intake. All my builds have always been LA motors. The 318 mag I have on the engine stand has been there at least 4 years. I've owned several magnums in their factory vehicles, but I have yet to do the magnum swap. It will happen though, someday, ...... maybe... LOL. I have the roller cams with fuel pump snout, I have the intake, I have the 360 oil pans and pick ups, but just haven't got around to it.
Click to expand...
Actually I think it would be pretty simple to make templates for that. I mean for a manufacturer to put one out for sale.
 
j par said:
Actually I think it would be pretty simple to make templates for that. I mean for a manufacturer to put one out for sale.
Click to expand...
I think there is somebody that has the template... Maybe Hughes?????? I also know EQ heads offers all theirs in either bolt pattern.
 
Should be the only time I'll have to look at it from this angle, so I'm taking a good look... :D
15580539123031961436651-jpg.jpg
 
318willrun said:
I think there is somebody that has the template... Maybe Hughes?????? I also know EQ heads offers all theirs in either bolt pattern.
Click to expand...
I can think of somebody that has a magnum on a stand and definitely has an old la cast iron intake manifold....
 
You must log in or register to reply here.
-

Back
Top