Haven't you left yet? You are not coming are you? Carlisle awaits
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Guess you didn’t see earlier post. Couldn’t get left this afternoon so I took long nap. I just now got everything fully packed and loaded. Leaving here shortly. Should be there when the gates open at 7
I saw the earlier post but you are procrastinating and I was sure you would have a longer drive than 7 hours
Right at 8 nonstop. I’m figuring 8.5-9. As I will have to stop for fuel once. Leaving here within about an hour.
And yes, I am a procrastinator at times. But don’t worry, I will be there.
Ddaddy
I'm changing the World... one pixel at a time!
It will take you between 9-10 hours. You have some weather in your way that will likely cause some serious fog as you get past Wheeling WV that will slow your speed.
Literally
Adios! Von Voyage!
Safe trip!
Its getting intense outside.
Power should go out any time. As it always does. Lights just flickered.
Power should go out any time. As it always does. Lights just flickered.
And its done. Non-eventful.
I am leaving on this Spiritual Pilgrimage they call Carlisle! OHLM....
You in the show field Craig? I'll look you up today.
You all have fun in Carlisle...
I have a busy weekend...
Graduation party for my niece on Sunday and then meet with Ron at the beach...
Younger kid is home and we will be working on his engine.... We should be able to install the pistons and then see what else we can get done.... Measure the compression and decide which heads to run, then install cam, degree cam and make sure it's in the right position, then measure the compression... If things go well, we may be able to get the intake and oil pan on it...
Then I have to install the lifters and rocker gear in the 340 for my brother's Challenger.... Then decide on the intake and install the oil pan...
My lawn needs mowing sometime this weekend...
Other than that, I have nothing to do....
I have a busy weekend...
Graduation party for my niece on Sunday and then meet with Ron at the beach...
Younger kid is home and we will be working on his engine.... We should be able to install the pistons and then see what else we can get done.... Measure the compression and decide which heads to run, then install cam, degree cam and make sure it's in the right position, then measure the compression... If things go well, we may be able to get the intake and oil pan on it...
Then I have to install the lifters and rocker gear in the 340 for my brother's Challenger.... Then decide on the intake and install the oil pan...
My lawn needs mowing sometime this weekend...
Other than that, I have nothing to do....
Gonna head that way shortly. Had my alarm set for 5. Brain started going at 3 and wouldn’t turn back off. So, I am just about ready now.
Cinnamon will be close by in R110
We’ll have shade and an extra chair if you want to visit.
Sounds good. I think my new goal is to get to know enough people across the whole place that I am never more than 50yards from a rest spot. Lol
Of course if Chris Jacob, the guy from Overhauling would want to show up we’d both have to leave and give Cheryl her goo goo gaga time.
No she said its not a car show unless she gets to give TMM a big hug.So she left the Tax Bureau and is now working with the State Police?@dartnabout
-
