Post your self portraits!

-
Me and my duster.

FB_IMG_1565148581530.jpg
 
In 68-69, I'm 20 Up the K6NCG amateur radio club tower at NTC Treasure Island
View attachment 1715374818

A few years later more like about 72--73 so I'm about 25 in front of my then girlfriend's house, Poway, CA. I found out a few years ago she had died around 50
View attachment 1715374819

Somewhere around '50 so this was about 98. Little tower in Colfax, WA up on the bluff above the town

View attachment 1715374820

After the big car crash, there's a pin all the way up my lower left leg

View attachment 1715374821

2016 after coming off my little tower, yup I'm tired

View attachment 1715374822

As a fellow tower climber i gotta give it to ya. That is hard work!
 
As a fellow tower climber i gotta give it to ya. That is hard work!
I gaffed a slick pole to 18' today..big whoop, eh? Still don't like coming down....They still make us free climb! No buck-squeeze fail safe belts yet.....
gaff.jpg
 
Last edited:
Yeah we do, i jist could have done with out the last pic tho.

Come by the shop. You been a stranger for to long.
After that picture I certainly don't feel like we're strangers anymore!!! That is textbook too much information!
 
The only rule when climbing anything is keep your self safe and your buddy safer.

No one else is watching your ***.

Is very a very short list of folks i trust to watch me when im short roped off my chest D ring, hundreds of feet off the ground.

Even shorter is the list of folks i trust when im climbing rock.
 
Last edited:
I gaffed a slick pole to 18' today..big whoop, eh? Still don't like coming down....They still make us free climb! No buck-squeeze fail safe belts yet.....
I admit, spurs are something I've never had the "pleasure" of......
 
New poles like that one are the worst, your only "in" about 1/4 inch as they are hard. Old poles are soft, you got to break the gaff out to release.
 
Me, my wife Di and our youngest daughter Sarah with Easton one our sons boys. They were all busy beating me at mini putt. The other picture is me at 17. Boy
times change!

IMG_20190720_111739.jpg


FB_IMG_1537558376710.jpg
 
Maybe you need to make a poster of this face and put it on the booth at shows to scare would be thieves off. lol

But it might scare away the good paying customers too!!!! :D

It'd be hard to find a print shop that'd be willing to risk damage to their equipment to print a poster like that out..... :D :D
 
Did you know your radiator hose is disconnected. Might be why you are over heating and losing a ton of coolant :poke:
OHHH ! that's where that puddle came from.... Ha! just fitting the old shroud on the new rad. Had to do a bit of the old "in and out". Thanks for the expert trouble shooting. I could use your sharp eyes! The finer things are growing a little fuzzy.
 
Last edited:
I was just finishing up some work on the roof of a tall Ram Promaster van.

IMG_20190726_135417288_HDR.jpg


And here's one from a gig a few weeks ago.

Untitled-3.jpg


FB_IMG_1562276677535.jpg
 
Structural steel work I did about 6 weeks ago
IMG_1357.jpg
IMG_1364.jpg
and photo for a catalog write up for Escondido Adult Education Welding program which I teach and also an Adjunct Professor in welding at Palomar College.
IMG_1491(1).JPG
 
-
Back
Top