Stop in for a cup of coffee

-
ZMan67S said:
Window regulator I found came in yesterday. NOS like new, in great shape!! NOS motor mounts I found cheap arrive today.
All I need is a fuel line carb to filter...Keefver you hear that ONLY one more part for my driver. :thumbsup:
Click to expand...
Biggest Mopar lie ever.
maxresdefault.jpg
 
ZMan67S said:
Window regulator I found came in yesterday. NOS like new, in great shape!! NOS motor mounts I found cheap arrive today.
All I need is a fuel line carb to filter...Keefver you hear that ONLY one more part for my driver. :thumbsup:
Click to expand...
Hey, my car is finished...
And I will likely be pulling all the interior out in the Spring to spray a bunch of parts with SEM. Want to get things matching a little closer. Probably a new package shelf board. Maybe some insulation...
 
zkx14 said:
Hey, my car is finished...
And I will likely be pulling all the interior out in the Spring to spray a bunch of parts with SEM. Want to get things matching a little closer. Probably a new package shelf board. Maybe some insulation...
Click to expand...
My car is finished...but I'm replacing the interior. Ok well then my car is finished to just replacing a few parts. :D
 
zkx14 said:
Hey, my car is finished...
And I will likely be pulling all the interior out in the Spring to spray a bunch of parts with SEM. Want to get things matching a little closer. Probably a new package shelf board. Maybe some insulation...
Click to expand...
Mine is done as well, just have to pull engine, trans, cut for new trans, install new ......................................maybe not quiet finished.........:lol:
 
Sublime one said:
Well we are cut off up here in the frozen tundra. The DOT just shut down our main highway for the entire state. Highway 29 which is our main artery is shut down from South Dakota to Canada for our blizzard today. Fargo sucks!
Click to expand...
I'm sure the better half isn't happy either.
 
ZMan67S said:
I'm sure the better half isn't happy either.
Click to expand...
Lets see, all I have to do is....Install lift, first make a place to install lift in, lots of sheet metal replacement, on 66 'Lite, complete resto on same, new engine trans in other '66, finish assembling it, Man I wish I had more projects to keep me busy...:BangHead:
 
Pulled both back wheels on the Neon. Sprayed some cleaner. Brake shoes etc all still good. Will pick up new cylinders at Pep Boys before work. Should be able to get them done Sunday when it will be above 40F and not supposed to rain. I could use the garage if needed, but prefer outside. More room, better light and especially since I will be spraying more brake clean.
 
"Hey folks, comments and conversations aren't allowed in sale threads or wanted threads as per the sale rules. Please send those through a personal message. Thanks, toolmanmike moderator" I had to post it. Geez, been chasing around issues all morning. One guy comments, the seller answers, and someone else chimes in. It turned into a full blown coffee shop discussion within minutes. Faster than I could delete the comments and send the offender a PM. :wtf::BangHead::BangHead::BangHead:
 
Sublime one said:
Well we are cut off up here in the frozen tundra. The DOT just shut down our main highway for the entire state. Highway 29 which is our main artery is shut down from South Dakota to Canada for our blizzard today. Fargo sucks!
Click to expand...
Wind is howling here,-45 with wind chill. In not going anywhere. Rad job is 1/2 done. So door gets opened once today. When in done.
Heater in office quit overnight, so i had to take it apart and fix it. Bearings were gummed up. Now it works better than when it was new. Go figure.
 
toolmanmike said:
"Hey folks, comments and conversations aren't allowed in sale threads or wanted threads as per the sale rules. Please send those through a personal message. Thanks, toolmanmike moderator" I had to post it. Geez, been chasing around issues all morning. One guy comments, the seller answers, and someone else chimes in. It turned into a full blown coffee shop discussion within minutes. Faster than I could delete the comments and send the offender a PM. :wtf::BangHead::BangHead::BangHead:
Click to expand...
go get them mikey
 
Tooljunkie said:
Wind is howling here,-45 with wind chill. In not going anywhere. Rad job is 1/2 done. So door gets opened once today. When in done.
Heater in office quit overnight, so i had to take it apart and fix it. Bearings were gummed up. Now it works better than when it was new. Go figure.
Click to expand...
Always something to fix huh!
 
toolmanmike said:
"Hey folks, comments and conversations aren't allowed in sale threads or wanted threads as per the sale rules. Please send those through a personal message. Thanks, toolmanmike moderator" I had to post it. Geez, been chasing around issues all morning. One guy comments, the seller answers, and someone else chimes in. It turned into a full blown coffee shop discussion within minutes. Faster than I could delete the comments and send the offender a PM. :wtf::BangHead::BangHead::BangHead:
Click to expand...
Always tempted. Like wtf?? $47,000 for a dart?
 
I do not like your avatars, I get confused who is posting, they all look the same...And I do not have one of my own!!!:lol:
 
You must log in or register to reply here.
-

Back
Top