Recent content by 63dartman

thanks Dave999 and Cudamark! those are the worms are I am trying to avoid. Good info and helps alot! thank you.

thanks for the info Murray.

I have a 71 dart, power steering box is leaking from the plates that bolt to the top. I am not sure Which plate is leaking yet. Sorry for not knowing what they are. Is it ok to remove them and check them for problems and maybe apply a thin layer of gasket sealer? Are there any gaskets that can...

67Dart273, just wanted to thank you for taking the time to go over everything with me. I just want you to know I think your electrical skills on these cars is top notch! I'm mediocre at best. What it did do though, It made me go back and review everything I did and study the schematics. I...

thanks, once I posted I realized that I got more problems than I thought. I also realized that I don't need the indicator lights for the signals to work. One thing I didn't mention was that I put in a IDIDIT steering column also. sorry for the confusion. I don't have 12v on the power wire...

does anyone have a diagram or can tell me what i need to do to bypass my cluster wiring for the turn signals? i know blue and light green are for the left and right signal but that's about it. I have looked at the schematics but its just confusing me more without the the cluster wiring diagram...

Thank you so much charger426 for taking the time to search and help me out. It will be a while before I attempt to redo my cluster but this definitely helps a bunch.

thanks for the info, I guess I need to just look at the wiring diagrams and try to figure it out. Is it just the turn signal lights that go through the cluster or do others also? Thanks again sir!

Wow, that is super nice, I never thought about putting a digital display in place of the old stuff. Might have to look in to this. Thanks so much for sharing.

I am in the process of redoing my instrument cluster to newer non oem gauges and do not know how to keep the turn signals and anything else that runs through these circuits working, does anyone know how to do this? I am removing the panel and starting with a piece of sheet metal like another...

Thanks everyone! I checked them visually and don't even see any coating gone or scratched. Definitely will try to reuse. They ain't cheap!

Can cometic MLS head gaskets be reused? Gaskets were installed and torqued but not fired.

thanks, Ill check it out.

its a pre magnum that came with roller cam and roller lifters