Recent content by gold68dart

I have one out of my 68 dart. Was running when pulled. Only 44K original miles.

Although not apples to apples comparison I had them on my 416, 4-spd Dart. Yes they are prettyloud but just didn't have a nice loud sound in my opinion especially at high RPMs...sounded too raspy. I switched to the original 40 series and they are still loud but a nice loud. If you like the...

Vinylex...I use it on my vinyl top, dash pad and door panel

Thanks everyone for the feedback. Just one question, is the MSD system overkill for a hot street car with occasional strip time?

Not too far from Pocono Raceway!

Hello - I am currently running a MP electronic ignition with the chrome box on my 416, 4-spd dart. I would like to have a rev limiter for the occasional trips to the track and avoid an overrev. I am very new to ignition systems so I am looking for suggestions on which way I should...

True! I had to trim off about 1/8" on the passenger side because I was rubbing when the car would lean around turns but the driver's side had a good 1/2" clearance and required no trimming.

Stock wheel wells, stock spring location...I fit 255/60R15 on a 7" steelie with 4 1/2" backspacing. It is very tight but it fits

The Slate Belt Mighty Mopar Car Club will hold its annual Father's Day ALL MOPAR Car Show this Sunday June 19th. It will be held at Reagle Dodge in Bangor PA (about 30 min north of Allentown). We always have a great turn out with a wide variety of MOPARs and a friendly atmosphere. Attached is...

255/60R15 is probably the largest you will fit with about a 4 1/4" BS

My 68 Dart: - stock 8 3/4" rear with large bolt pattern axles - stock spring location (SS springs) - 255/60R15 on 7" steel wheels with 4 1/2" backspacing - on drivers side: less than 1/2" clearance to fender lip and about 1" clearance to springs - on passengers side: had to trim about...

My brother runs that size tire but on a 7" rim on his duster and also has rubbing issues. He has more space in there then I do on my dart. Aside from getting a new tire/rim size you could try to extend the brace but I don't think that will help much. For example, I am running 215/60R15 on a...

Thanks for all the suggestions!

Can anyone recommend a good place to order a set of Cragar S/S rims with custom backspace for my 68 Dart? I need a 4 3/8" BS (or close) for the rear on 7" rim to clear my 255/60R15 tires. I am running a set of steelies with that BS and everything fits nicely. My local auto parts store says...

Since I have the same color combination, so this should give you an idea as to what the dog dish caps would look like. I am running 255/60R15 with 4.5" backspacing on the rear and 215/65R15 on the front.