Recent content by LImopar

I have both bellhousing and flywheel. I sent you a message with info. Let me know.

I have a cast bell housing out of a 67 or 68 barracuda $75 plus shipping. The opening is 4.30. The bell has the bracket for the clutch fork and a new rubber boot. The fly wheel is 122 tooth and was resurfaced before being put on the shelf. $75 plus shipping. The items are located on...

I have a brand new unused raybestos 450-1033 idler arm in the box if you are interested. Let me know Anthony

I have a bellhousing cast number 2806081 and flywheel for sale. Fly wheel was resurfaced beforenit was shelved in the garage. I believe it came out of a 67 barracuda with a 273. Both in very good condition. The parts are located on long island in new York. Make offer.

Just picked up a 340 from the cousin of a friend. He did not know much about the motor as he received it in a trade. As far as I can decode it is as follows: Block 2780930 date 6 30 70 Heads 3418915-G J heads Intake 3512100 date 6 23 70 Pistons marked 030 and have 4 small half circle...

Anybody know where I can get the studs to bolt scoops down to the hood. I only need two studs and 4 of the nuts. I did find a complete set for $100 at the PADDOCK but they do not sell them seperately. For my amusement I asked how much shipping would be for the complete set (16 studs and 16...

I have both front and back Hellwig bars on my 72 dart. Awesome product and great customer service. I had ordered them a long time before I actually installed them. By the time I got around to installing them they upgraded a few things on them. They replaced the old style hardware with the...

I found them on E Bay. I also called them directly to make sure they would work with my application. There should numerous pairs for sale still on ebay.

I am about ready to completely rebuild the front end of my 70 dart with 73 and newer brakes and all new suspension parts. It is a /6 right now but will be a 340 in the near future. I want to upgrade the torsion bars while I have everything apart. I am thinking about buying a set of 1.0...

Thanks for all the replies. I think I will go with the regular lines from a 73. Quick question about the proportioning valve. Are the after market adjustable valves easy to install and do the they operate as well as the stock valves.

I am converting my 70 dart from sbp drum to bbp disc brakes. My question is I want to order a complete stainless brake line kit but not sure for which year I should buy. When I do the conversion I will be using a proportioning valve from a 73 up disc car. Do I buy the stainless kit for a 73...

Thanks Rumble. I picked up the new motor this morning from Advance (second one) and installed it. As per Murphy's Law there was still nothing going on. After about a half hour of trouble shooting I found that the new motor was not grounded properly because of the heavy coat of paint that they...

Well I purchased a reman wiper motor from Advanc Auto(Cardone) and when I open the box it looks like a piece of crap. I remove the old motor, change over the gromets, ballast resister and spend the time to mount the motor to find out it is dead. I take the new motor out and remount my old one...

Thanks for all the info. I will try to do it under the hood first. I was just afraid to put too much stress on any of the linkage when trying to get enough slack to be able to remove the nut that holds it to the wiper motor. One last stupid question. When I get the linkage off and put the...

I have to change the wiper motor in my 70 Dart. I am trying to remove the middle portion of the fake wood dash so that I can get the radio and heat and A/C controls out of the way so I have a straight shot at the bolt that holds the linkage onto the motor. I feel like a moron but I can't get...