Thanks for the info.If that can't be the letter F It almost has to be an E by the looks of it.I have had this motor for years going to try and sell local for a $1000 STD block crank and pistons.I also have Xheads intake,exhaust manifolds timing cover oil pan carb for sell also.Thanks again for...
Thought I would post before I sell this standard bore 340 locally in case someone is looking for this motor. Not sure what it came out of if someone knows let me know thanks!
Looking for a set of these. I was told the 68 69 70 340 covers all had the 4''wire loom shield on the passenger side.I don't see that on yours which might mean there 318 covers.
A friend had a similar problem, Found out he had the front calipers on wrong right and left causing the bleed valve not to be completely at the top causing air pocket.
I have a 70 340 Swinger, When I bought the car it was untouched and original with only one horn is this possible or is it missing I see the wire for the other horn. If its supposed have two are they matched or Hi and Low Thanks in advance.
Double checking before I start troubleshooting.To check for alternator charging I can put meter on battery with motor running unplug field wire and jump field to neg side of battery to make alternator charge correct? If its charging then go to regulator not sure how to check that? Everything is...
Looking for a correct picture of 68 340 valve covers.I know 68 69 70 are all different. Going to start looking for a good set but need to know what I'am looking at.This 340 I have is dated 9-68 maybe I need 69 covers? thanks