Recent content by ryansiki

Even at $13/14K it can be hard to find a buyer up in Canada. Now with oil in the shitter it's only gonna get harder.

Turbo hamster LOL - YouTube

Love the smell of diesel, and the newer ones are capable of crazy numbers( over 500hp,and 1000ft-lb isn't unusually), and they get 20mpg.....while hauling.

Yup learned to do it with a bench grinder and a drill gage, but at work we just load the drill bit into an auto sharpener, the drill bit is held by a piece of angle that has a sliding stop(with fine adjustments), then the grinding face slides over the drill bit in an arc, perfect bit ever time.

https://www.youtube.com/watch?v=AtG4qWv0v44

ok, now should I be prying at the hub or that ring with a bunch of holes around it? Next problem: new bleeder screw pulled what was left of the threads out on the rear drums(passenger side only), was planning on trying to re-tap it, but after a lil more thinking it probably would make more sense...

Bought a 1992 3/4 Ton 4x4 Dodge pickup with Dana 44 up front that needs the passenger side axleshaft replaced. I bought a shitty Haynes manual but it only covers the manual hubs. Got the snap ring off but after that Im at a loss as to what to do.Help?

I usually rock the half leathers(take regular welding jacking then hack off the bottom part,couple inches below the armpit), but for at home work on a lil buzz box I usually just use a long sleeve or hoodie. Just be careful of synthetics because they can catch fire or just melt to your...

If you guys have netflix check out death by china Death by China Film - Official Trailer - YouTube

Sometimes ya gotta bend over like a woman, and take it like a man

Never gets old to me, was reading the youtube comments and apparently the guy in the chev was talking chit. Moral of the story: Don't f*ck with cummins!!

looking for those too. Remember reading the name but forgot to write it down:banghead:

dont think its a specific camshaft. Thinks its a line of cams that gives the loud muscle car sound that some people go after....

my '74 Duster had one broken on one side. It was small enough that I could just epoxy it together and rattle can it black. Also drilled a hole to stop the crack from continuing.

Doing the floors either way is gonna be work so do it right the first time. Nothing burns my *** like having to do repairs on my repairs.