Search results for query: alignment

I was looking at getting the bubble type of caster/camber gauge to do my own alignment but since I have aluminum wheels with aluminum hub that won't work. What are you guys using?

Magnetic Trailer Alignment Kit $5.00 Buyer pays the ride...

Rebuilding the front end on a 65 Valiant and need to have it aligned. Can't seem to find anyone who works on these anymore. Does anyone know a really good front-end alignment shop in the Los Angeles Area that doesn't overcharge for alignments on these cars? Thanks

I know it's not an "A" body, but my son has an 85 Ram Truck and needs an alignment. Does the skosh chart also apply to trucks? If not, what should the alignment specs be?

Need recommendation for alignment for 69 Barracuda in San Antonio/Hill Country area. Tried two in Boerne with no results. Thanks

Hey guys and gals I live on the Mississippi gulf coast and need a good alignment guy , when I got the car the person before me put all new bushings , ball joints and tie rod ends and didnt have it done or even get it close . I am going to get it close enough to drive it to a shop but I need...

I'm going to mate a newly rebuilt 360 magnum to my newly rebuilt A904...I've never checked crank to bell housing alignment, what tool or methods do you all use to do that? brian

Alignment shop

I seem to have an alignment problem here That is a 734 10-1/2" bellhousing and a Brewer's BSB734 ball stud bracket, which should work on this 71 Duster. The engine is installed and the trans mount is installed, so I'm pretty sure those are where they should be. The engine mount brackets and...

...original. 318 car, 904 trans, aftermarket intake and 4 barrel carb. Car was originally an AC car & that was removed. The alternator belt alignment was put together with a rather unique use of washers & I am seeking your advice for how best to resolve. I assume this relates to a...

I called the following: 1) Simpson Frame- the guy wants $450 for the front-end alignment. $175 per hour. 2 1/2 hours for a front alignment seems really excessive. Can't imagine it takes 2 1/2 hours for an alignment. Being that the last guy (Unfortunately, he went out of business) who aligned it...

Marlo's Frame & Alignment, Van Nuys. Marlin’s did all the alignments for Restorations by Julius when he had his Mopar restoration shop in LA. Cars Automotive & Muffler, Redondo Beach Steve at Johnson Alignment, Torrance Simpson Frame and Alignment, Hollywood on Gower. Tyerman's Automotive...

THe best way.

There are issues, but there are fixes: Classic Auto Air Belt alignment fix

Not Mopar based video.. but a neat alignment setup for not a huge amount

whenever i changed from drum to disc i rebuilt the entire front end so the alignment was off anyway. :)

I agree, depends on the guy doing the alignment.

Make yourself one of these. It can be held to almost any rims with springs or small bungie cords. I use mine on Cragars, American Racing wheels and various others. And yes. you will get a better alignment with less hassle doing it yourself.

Related left and right article. May same you some time. Agree with Post 10. Initial Suspension Settings for my Dart Before Alignment

No...alignment should not change except when you raise the front off the ground, then set it back down. Once you move the car, it will settle into place. If all the components are in good condition, the alignment will only change as the bushings and steering components develop wear.

Thanks for the feedback. Simpson is in Hollywood and been there for a looong time. Seems they are pretty proud of themselves. Pass on that for what you are doing. Distance would be a factor on the others from you.

Any have a recommendation for an alignment shop for our cars? 1970 Duster, I’m finishing up replacing pretty much everything up front and would like to get her lined up!

Today was alignment day! Trailered her there and drove her 20 miles back!

Explain further please

I need to know what to do on my locking pawl alignment. The one on the passenger side (right side) is fine but the drivers side (right side which is the adjustment side for backlash) is off quite a bit. I have the backlash right at .008.

The alignment shop uses degrees in their software for toe instead of inches. What should the 1/16" to 1/8" toe be in degrees? Edit: And should the settings be the same side to side?

Having trouble figuring out pitman arm install Not sure which 1 of 4 spline alignment positions to use. The box did not come with a pitman arm Any ideas?

They won't clip on if the linkage isn't in alignment i.e. z bar. They should almost go on by hand. I use a needle nose pliers.

How do you know the intake is too high? By alignment of the ports or by the gap on the China walls?

...to that accurate.. For many reasons.. A) Operator Error B) Calibration issues C) Equipment issues I worked in enough shops, They hire alignment techs based on an interview with the interviewer often having no knowledge of how to tell a tech from a poser.. So throw a guy who's been doing lube...