Search results for query: *

Got a pic of the fender tag? I believe the upper door frames should be blue and will be on the tag. Yes the dash pad should be blue...

Well…… right about 30 of the 40. My intention is to continue on up to and past 40. Seeing how I have stuck with it, and promise to stay with it…..all is good..lol She tossed me the keys :lol:

Yah, it's weird they put that in the 62-65 reference when that is for 66.

Did we make weight. Lol

That's an under statement.

...same rpm as it does now. How it works is explained in another thread, but basically the secondary spring contact is based on degrees of advance. If you're going from say 5* initial to 15* initial, then the secondary spring needs to be adjusted the equivalent of 10 crank degrees to be...

I recently put a new deeper style tranny pan (3” deep as opposed to the old one 1” deep) on my 904 which I knew going into it it will take a couple extra litres as opposed to the shallow stock pan but I’ve now got 9 litres in there and it’s still not showing full on the stick!!! Will that deep...

Another pic

I would be surprised if the rocker shafts themselves are clogged. You could probe the mounting holes with electrical wire and carb cleaner to see if anything is in there. You can check the shaft exit oiling holes by removing the rockers and taking a look. You should carb cleaner the rockers...

I plan on attending. It's usually a good show with plenty of cars and used parts for sale. Some new part vendors as well.

Nice

Topping off the battery as we speak. Once it’s done, just gotta have a buddy stop by and hold the doors and guide me out. Wife usually is here to help, but she is out of town till Saturday. Hopefully tomorrow.

As long as it goes away or gets quieter when it warms up, I wouldn't worry about it.

Right in the living room lol ( I know it's not)

Can't wait to watch this. Darin is a badass

Yup. And if I knew before what the actual goal was, then you know what my suggestion would have been. That would have put more tension on the primary spring from the get go.

Don't ask me. I told you what the heavy spring was for.

Something to consider , I unfortunately did not . I bought a set of Keystone Klassics in the uni lug pattern for my sbp Dart just figured I'd use the adapters. The wheel adapters for the 4" to 4 1/2" are 1" thick . When installed on my Dart with the wheels they stick out almost a 1/2" to far and...

I got a couple of blank spaces, but what I need for this one is in there. I have an open trailer so nobody thinks I have anything..lol

440 Source #101-1023

I have two just like it. Gas and alcohol. My problem is people know I have it and their fortune of borrowing jets is my problem of having to buy new ones to replace them. I’ve heard every story in the book. Goes for floats, needles and seats, and gaskets too. I have an enclosed trailer because I...

Never seen an "end seal". All I've ever seen were pressed in plugs. Just get the appropriate size freeze plug, put the sealant of your choice on it and hammer it home.

I know a few things from tons of research during my build. The problem is that my memory is real dumb! I'm trying to do better at keeping good records of things for future reference.

Have you seen Chris Birdsong’s video on green bearings? He REALLY hates them. Junkerup on YouTube. Found it.

Got it. That is the only thing that I think might be an error that I have found on the earlycuda.org site. This is from the site. “BDY” is the body style or model of the car CH42 New Yorker BP29 Barracuda DL27 Polara PP23 Sport Fury etc.

I prefer the 68 grill, but it looks odd with the rectangular side markers. I always thought the 68 grill and markers would go good with a rally dash.

Haha…. This is what I have. Pulled it out to doctor up this carb after I get a power valve tomorrow morning. This box exudes “ old” I have had it probably 25 years

Nice. My Sons prude ex girlfriend worked in a salon in the same parking lot as the local Safeway store. Him and I pulled up right in front of the big picture windows, set the line lock and did a 1-2-3 shift smoke show. Kinda surprised me to hear people screaming like they did. You would have...