Search results for query: *

Recently I had a spare set of wheels painted to match the car and put dog-dish hubcaps on it. Prior to that I had the Bolt-thru wheel covers on it. Curious to what others think Alan

Before I get to my questions I will say I know i could blindfold my 10 year old niece and play pin the decal on the trunk lid and be good enough, I get it. Initially I purchased a trunk decal for the convertible off eBay, from my initial search I found a bunch of sellers with the same decal so...

Looking for a 1967 Valiant 2-door, open to different cars in different condition, Would prefer a V8. More original the better, more complete the better. No hurry but may consider a 68 or 69 Not interested in Darts Not interested in other years Not interested in 4-doors (for now) Will...

This is an odd one, the 1967 Parts book only list one number for the 273 and it is 2806066. In 68 the number changed and there were two different numbers, 2863211 & 2863212. Out of curiosity I looked at 66 and it had two different numbers. One might think it was a mistake in 67 or an...

The 1967 right side engine mount bracket 2843224 is different than the 68-72 2863443 Both brackets will work and 273/318 from 67-72 but the 2863443 must be used on the 340. The only difference is the addition of a hole, otherwise the bracket is the same. Top 1967 The reason for this was that...

This is something that comes up from time to time as the instructions in the service book are a little deceiving/confusing. This is from the 67 Barracuda Service Bulletin 67-25-6 Not mentioned is that this is done before the fuzzies/cat whiskers are installed. I also leave the rear channel out...

A couple years ago I purchased this car from Max Heim ( @mvh ) Not even four week later I'm on the road to Oregon with the car, overall the car performed good, a little anemic on the hills. This car draws far more attention than my fastback, lots of waves and thumbs up, you can't get gas...

A friend of mine was asking about this bracket said to be for 68 340 engines, I can find no reference to it in the parts book or the assembly manual. Alan

With the recent talk about IBM cards and decoding them I thought I'd share what I have learned This is an example of a card with punches representing Numbers and punches representing Letters I do not know if there is an official label for the first two rows I just labeled them A & B In this...

Need a few front seat springs, not the full seat or seat bottom. Alan

Sometime back someone mentioned using a 68+ hardtop gasket on a convertible so they could use the bottom stainless and not the chrome plastic lockstrip. I'm not sure who or where (another forum maybe?) Does anyone know anything about this? Thanks, Alan

Literally every link I click I get this (not happening on FCBO) Alan

Looking for original shift clips and thin washer used on the shift linkage in multiple places. Need 2 of each but should probably have a couple extra on hand. Alan

For about 10 year plus I have been wanting to freshen up the paint on my bolt through wheel covers. The convertible I recently purchased had these wheel covers on it but were fully polished and no argent accent on them. I took that set off the car and collected the set I have for my fastback...

Wanted base for an unsilenced 2 barrel air cleaner like this one... Alan

Today a fish changes curatorship from on member to another. A little while ago Max (@mvh ) indicated to me that he might be selling his convertible and I told to him to keep me posted. The day came and I said yes. Max on the left. With our two copper fastbacks at a recent show. Alan

I can't find any information on the show. Does anybody know if it is happening and when? Alan

Visiting my brother we herd a rumble out front, caught a Dart driving by. After he turned into the neighbors property we headed over to check it out. A 440 equipped 72 Dart, don’t recall any of the particulars. Alan

1994-2020 This is a car that belongs to Max (@mvh), I’ve known this car longer than Max. In 1994 I went to the Pebble Beach Concours d'Elegance with another friend, like all the other cheapskates we parked out on the road, I find a spot and just across the street was this copper Barracuda...

I'm looking for these in better than average condition, pitting seams to be an issue with these. Thanks Alan

@BPTracing For those who would like to know what the correct style timing tab for a 1967 272 is here is a picture of mine. It should have the hole in it. Alan

Looking for a voltage regulator cover with the mounting flanges that have the bolt holes. Not looking for the one that snaps on. It doesn't need to be perfect as I will be restoring it. Having the ground clip would be nice. NOS on the left, my restored one on the right Alan

Prefer standard, lets see what you have, Thanks, Alan

As far as I know this is all of them, the two emerald are different (one Dodge the other Plymouth), same with the Nitro (lime). Were there both Plymouth and Dodge on the other colors? I don’t know. Alan

I need the clips to hold the load area chrome trim in for a 67 Barracuda. There are two screws as well, I need those. The screws look to be oval head, probably chrome. I have none, looks to be 20 clips and 2 screws, I don't even know what the clips look like, assuming the bent wire type. I'll...

I have most of the special Commando 273 parts. Intake: Casting Number: 2536563 $50 SALE PENDING Distributors: 2642242: w/o CAP nice - $50 SALE PENDING 2642461: w/o CAP nice NOS - $100 2642358: w/CAP very nice NOS - $250 Carburetor: 4305: Auto w/CAP $100 Throttle Bracket/Linkage: Bracket...

As the title says, wanted: Mopar Action magazine August 2015 Thanks, Alan

I know that it mounts up near the alternator. Questions: 1. Whats it hold? Fuel line? Dipstick? 2. What years? Thanks, Alan

December 1966 my grandparents were in the need for a new car as there 63 Valiant was just wrecked. They went to their local Plymouth dealer Guy Moothart in Compton California, they looked around but didn't see anything they liked, 67 Valiant and 66 Barracuda only as the 67 Barracuda was a late...

December 1966 my grandfather purchased my Barracuda new a few days before his 56th birthday. I have always questioned the purchased date as I have two different references for it. First is the original owners manual showing December 8, 1966 Next is the original Certicard showing December...