Search results for query: *

Hi guys i have a 727tf behind my 426sb with 600hp, today i make a test round around 100miles and back because i wanna sell my car, the trans is like new i made some 1/4mile runs last year, around 4 times nothing much And today when i drove the 100miles the car shifts in every gear i didnt drive...

Hi guys on my 426sb from hughes i have some problems with my spark plugs, hughes engines says i need NGK R5671A-9 When i run my engine at idle about 5to 10minutes and i want to start it again a day after i have wet spark plugs, i have my mixture screws a 3/4 turn off, with a half turn i dont...

Hi guys i ve some problems with my driver side upper control arm and the sway bar studs at the left side the sway bar studs look like more straigth even on the driver side the stud touches the brake caliper and with the upper control arm the rubber dont sit in at all as u can see in the pics...

Hi guys im looking for 1/2-20 thread door jamb switches, may u can ship me that to austria Thx Peter

Hi guys i have a stroked 426 from hughes engine and now its the 3rd time that i have really problems with my head gaskets, i use felpros 1008 What i have to change is my cheap radiator from procool that is just crap, my engine dont cool down, i just use the car with this engine for 1/4 mile...

Hi guys i have a edege converter and i counted 131 teeth, i thought that all sb mopar converters has 130 teeth, i had always problems, because the starter didnt engage into the ring gear from the converter correctly, so i thought maybe that is the problem... On my starter from powermaster i...

Hi guys i have a 426sb from hughes with a 950 bigs carb with a race mechanical pump and fuel regulator with return line to the tank, so when my car sit for few days 3-4 i have no fuel in the carb windows, and i have to crank crank and crank the engine, that sucks! Do i have a leak in the carb...

Hi guys i want to knew where can i get a new converter ring for my 727 sb converter, the teeth from my ring are damaged because i had some problems with my starter before, but i cant find where to buy a new ring, could i also use a used converter and get the ring from there And how do i have to...

Hello guys i would like to knew what all parts i need for a ring and pinion installation i have installed a 3:23 now in a 8 3/4 center section with the 489 case and i have laying around some pinion and gears from 3:91, so my Question is do i need new bearings, shims ect... the center section was...

Hi guys on my plymouth duster i run 255/60 R15 semi slicks on draglite wheels at the 1/4 mile when i put the 2nd gear the rear fenders hit on my wheels, i have stock leaf springs and **** shocks, monroe sensa track...

Hi guys i have a 360 magnum SB and aluminium edelbrock Stage 3 heads with Arp bolt, and i need the torque Specs please for the head bolts Thx Peter

I want to get rear calvert shocks adjustable for my 72 duster thx Peter

Hello guys i would like to get some Wheels (1 pair) 15x8 5x4" bolt patern please let me knew what you get, thx Peter

I got a windshield for my 72 duster that does not fit, it has the number DW856GBN Is anyone know on wich cars that windshield fit, because i need to sell it i got the right number for my car now thx Peter

Hey guys i bought this fuel line for my car http://www.summitracing.com/parts/sum-220788/overview/ to late i read that: Notes: This hose is NHRA approved, however it is not recommended for fuel line use. You guys knew if i still can use it for fuel or not? Thx Peter

Today i broke the conductor of my mechanical temp gauge, which goes from the firewall to my intake, is anyone now how i can repair that? Or i need a new gauge now? Thx Peter

Im looking for 73 abody brake dust shield`s and i need the 2 bolts for the lower ball joint with nut, and i also need the nut that holds the ball joint down Thx Peter

Hi guys can you tell me please where i have to put this plate on http://s7.directupload.net/images/130506/fdseg8np.jpg behind the firewall (inside the car) or in the engine area a guy told me when i put my brakes the whole firewall move in and out... so i guess i miss something there Thx Peter

Hi guys i want 15x8 wheels with 4,5" backspacing at my rear, i have an 72er duster with 8 3/4 rearend and 255/60 15 Semi Slicks, would that fit? Thanks Peter

Hey guys i have a problem with my starter and my transmission gear rim when i crank the engine (426sb from hughes) the starter crank to the converter rim and it sounds like the teeth from the starter will not really reach the teeth from the converter it sounds really bad everything is new, i...

Im looking for some rebuild lca`s 73-76 thx Peter

My msd 6 plus was not working and the red led shows up, i took the box to an electronics engineer he told me that one fuse was gone and a resistor now he is wondering were i can find them replacement parts? There are no numbern on it Thx Peter

I want to upgrade my 60 foot time last weekend we had 1/8 mile race here in austria and i run 8.078 @ 96.31m/ph my 60 foot time was 2.083 and i want to get a better start, i have a 426 small block from hughes with 3500stall and 3.23 gears i want to change them into 3.90 gears, in the front...

Hi guys i just made a short vid where you can see that my fuel pressure gauge is shacking, before i had one from allstar with glycerin and the one died now i have one from russel performance but its the same thing, could it be that i have some leaks up the lines? My car drive good without any...

Hi guys on my 426small block i have a 950 bigs stage 3 installed, when i turn the key and start the engine, you can clearly hear from the carb that there is a rattle noise and it swoosh all the time when i get the rpm higher there is nothing to hear, i hope you guys can help me, what could be...

Hi guys can u tell me please for what that marked wire on my steering column is? thx alot Peter

Hi guys im looking for the 727sb dust cover not the small one i need the big one which goes around the starter thx alot Peter

Hi guys im looking for a nice steering column 72 abody floor shift, please let me knew what you have Thx Peter

Hi guys i have very very bad vibrations in my car, just when i start it in park and i wanna crank it around 2000-4000rpm everything is vibrating, when i go with the first gear ( i have reverse full manual valve body) and cruise on the street everything is vibrating that much, i thought like the...