Search results for query: *

So my gauges still aren't functioning. I believe it has something to do with the ground for all of them. I was told this is grounded through the dash attachment screws. I also seem to be missing the top metal plate that goes on the dash as well. Thinking this might be the issue. Seems all the...

Got my carpet ready for install. I don't have the original so I'm struggling trying to get it right. I got the first part in (back seat area). Might have trimmed a little too much so I dont want to mess up on the front part. It is an auto with a center console. I lined up the molded parts of...

I got new cargo area carpet for my 68 fastback. Looking for some tips with the install. What's the best technique for the install? The side wheel covers did not have carpet but I wanna put it on there. Do I use the L shaped trim? Does a bit of carpet go under it? Does the carpet go under the...

Headlights aren't working on my 68 Fastback. I believe it is the ground. I have 12v at both high and low beam. Where does the ground connect. I have grounds for the inboard turn signals that are connected to the rad support, but i cant find where the headlight ground is?? Where would it be on...

Trying figure out a few missing connections on my new wiring harness. This one is a black one joined together with the red and white ones that connect to the brake pedal. The first one is in the car, the second one is the original wiring harness.

So I've got a starting issue with my 68 Fasback 318 auto. Can't seem to get it to start from the key. I can get it to start and run by using a hand held switch at the starter relay with the key on. There is a brand new inside wiring harness, starter relay, ignition switch, and fusible link. When...

Getting ready to have my windshield installed.(68 Fastback) The installer claims that not all clips for the windshield are made the same. He said he has issues with the ones from Classic Industries. Is there another place I that I should get them from?

My carter bbd is leaking from the from the throttle body linkage. Its the original carb on the 318 in my 68 fastback. Is there a bushing that can be replaced on the shaft?

Trying to put the glass back in. I think I’m missing a piece. I believe the white pieces are what attaches it. Is it just those pieces or is there something else that goes on the glass?

Trying to install my dash bezel. My dad had it rebuilt. The screw holes at the top are pretty big. Not sure what screw goes in there and how it attaches to the dash.

Trying to install my windows and ran into a few snags. Not sure how the lower adjustment rod attaches to the window frame or door? I also seem to be missing one of the adjustment rods. Are those available anywhere?

One of the many unmarked parts my Dad bought for the fastback. Not sure where this all goes. Anyone have an idea of where these go? I think he might have got them from Quiet Ride Solutions. 68 Fastback

While my car isn't a Formula S, my dad had the stripe put on when he bought the car new. In doing the restoration, he decided he wanted to put it back on. He ordered the decal from Year One and wants to put it on. Anyone have an idea of the corect placement for the Formula S stripe?

I am looking for the red sticker that goes on the back of my 68 fastback. It goes on the trunk lid between the two trim pieces. i remember seeing it somewhere but can't seem to find it. Any ideas?

It took over a year but it was well worth the wait.

Got a call from the body shop looks like it is being delivered in a week. It has been just under a year. In that time I moved a thousand miles away and have been trusting the shop with my car. My dad is the original owner of this car. I have been waiting for this day for a very long time...

While the car is in the body shop i have been repainting and touching up interior pieces. i want to repaint the side panels in the cargo area. But the are a textured look. How do I get rid of the scratches and keep the textured look

Made it to the Body Shop to check out the progress. It is going on eight months in the shop. That's a frame jig to help straighten out the rear end. It was hit a few times in the rear quaters. This car has been in my family since it was purchased new and I can't wait to put ot back together...

My 68 fastback 318 has a minor problem. Turn the key accesories will turn on. Move to start nothing, no click. Replaced starter relay nothing. I can turn the key on and sart the car with jumping the to poles at the starter relay. Starts up fine doing that. I have narrowed it down a bit...

I need new quarter panels and a new trunk bed. I know Year One has them is there a better place to but them through?

This fastback has been in and out of my entire life. My parents bought it new from the lot where my grandfather was head wrench. It's a 318 fastback nothing fancy. The car brought me home from the hospital when I was born (35 years ago). My mom drove until I got it high school. I was to...

I am looking for a 68 fastback lower quater (not the whole panel). Can't find it at goodmark and paddock . Any ides where to look for one. I don't want to have to buy the whole skin.

The body shop that is fixing my rear quaters won't touch the glass on my 68 gastback. He doesn't want to break it. Is this really hard to get out? What will I need to buy to put the window back in?

I am switching my 318 to a 4bbl with a eddy preformer intake. which AVS carb can I use. It has A/T and no A/C. Can I use one that was made for a car with A/C. What will I need to do to the intake? thanks for the help

What manifolds will fit on my 68 barracuda fast back 318. Right now it has the stock 318 manifolds on it with a single exhaust. will 340 or 360 mani's work. I probably should just pay the money and go for the headers

I am in the process of building up my 318. It is toally stock right now but a new cam has been ordered and my new edelbrock performer is waiting in the garage. I am now looking at the carb situation. Is there a big difference between the carter 650 and the edelbrock 1406? What would be some...

My stock 318 in my 68 fastback shows that I am getting really low oil pressure from the in dash gauge. I got an external gauge to use but how do I get at the sensor next to the distributor. There is no room to get in there what do I need to remove to get at the thing?

I was curious and was checking out smethings on E-bay. There were a few companies sell CNC intake manifolds for 318's. The seem like a good deal. But I know that when something is a good deal there must be something wrong. Any idea if these things are any good...

I have a stock 318 in my 68 Barracuda. I am planning on spice up the engine with a new cam, intake and carb. Is it worth switching to electric? It seems like a few people have had problems with some of the units. It seems like such and easy upgrade to do? Is it worth it?

I have a 68 fastback barracuda. Handed down from the original owner, my dad. The engine was rebuilt about 10 years ago by my grandfather, a mopar mechanic for over thirty years. It was done pretty much to factory specs. I am planning putting a little punch into the motor with a new cam...