Howard,
Could you please notify potential buyers of my 71 dart in San Diego. For all intents and purposes, it looks to be in about the same shape as yours, but I haven't had a bite yet. Please read my ad and see if there's something that I'm doing wrong. Wife passed bike test, took a ride on...
'71 dart swinger, front end rebuilt with poly bushings, kyb shocks, sway bar, .990 BB torsion bars, 11.75" B-body discs, etc. Rear has spring relocation kit started, needs to be welded in. Body is pretty solid and straight - has some rust on roof from vinyl top and one hole in rocker panel...
Have '71 Dart big block 4spd project in San Diego.
Have complete 4spd kit from flywheel through scattersheild with floor hump & pedal kit, 4spd with two shifters. Front end completely rebuilt with poly bushings, KYB shocks, 11.75 discs, sway bar, C-body tie rods, etc. Have started rear spring...
check out Milodon part #31470, that's the "newer" one that I have with the swinging pickup installed. It comes with a length of steel braided oil line and a pump. Send me a PM with your email address and I'll get some pix and forward to you and we can discuss further.
Later and good luck...
Have a complete big block A body 4spd setup.
Scattershield with motor plate, flywheel, pedal kit & trans hump, brand new Hurst Vertical Gate Shifter with proper A-body installation kit (never installed, just opened box and checked it out), Z-bar & ball joints for same.
Located in San Diego...
Have a '71 Dart roller in San Diego. Relatively rust free - has some rust holes at sail panels & along edge of roof due to an idiot who doesn't know how to prep a roof for a vinyl top. Have the front end COMPLETELY rebuilt with poly hardware, etc. 11.75" discs, C-body tie rods, etc. Have a...
I've got some on my camera, but can't find my cable to upload onto the computer. It's easy to find in SD. If you're in the area, let me know and I'll forward directions.
'71 Dart Swinger complete roller. Front end completely rebuilt with BB torsion bars, 11-3/4 HD disc brakes, B-body spindles, & C-body tie rods. Body is solid, had vinyl top which has some rust holes (small, easily repaired). Spring reolocation has begun, but not welded in, can be put back to...
'71 Swinger, front end completely rebuilt for big block - .990 bars, 11-3/4" discs, all poly bushings, KYB shocks, etc. etc. etc. Have elephant ear setup for big block, have two (2) Milodon A-body specific oil pans - one with swinging pickup and external line, have complete 4spd kit from...
I have a complete 4spd setup inclusive of Z-bar & pivot balls, big block scattershield, 4spd with stock shifter, one of the last Hurst Vertical Gate 2 Shifters still in box (NOS), complete pedal setup, & floor hump (have I missed anything??).
Please call me at 619-571-6165 to discuss.
Thanks
Got a '71 project car in San Diego.
Please e-mail me for parts list and pricing.
Basically it's a 440 4spd project car with the front end completely rebuilt with poly bushings, 11-3/4" discs, C-body tie rods, & .990 bars for a big block.
Car runs with /6 now, but needs a fuel pump and brakes...
I've got a '71 Dart 225/6 auto with parts to make it a 440 4spd in San Diego.
I know it's a trip and 1/2, but my 75 year old parents make it every year and now's the time while the weather is OK. Car is is decent shape (incredible for back there, I'm from Janesville, WI originally) and it's...
MoParMetal,
I have a /6 to Big Block project car in Carmel Mountain.
I've posted here as well as on Craigslist.
Please email me at [email protected] if you're interested and I'll forward you my parts/price list.
Thanks,
Dart 440 4spd
Just on a whim, put the tube on your WD-40 can and spray around the base gasket of the carb. If there is a vacuum leak, the RPM's will go up some more. This is an old trick that I learned and it may be what's going on with the carb as well as the butterfly issue.
Good luck!!
Dart 440 4spd
1971 Dart, 440, 4spd, hydraulic clutch, pro-parts headers, manual steering, elephant ears. This is the setup I'm going for. I have already installed the new 11-3/4" brakes off from a 76 cordoba, but have not installed the proportioning valve yet due to fitment with the headers and clutch...
I ran across this guy a few years ago at the Spring Fling in Van Nuys, CA (see www.cpwclub.com ) and he's loaded with all kinds of used stuff. His name is Daryl Finch and can be reached at 760-249-3929 or on his cell at 760-963-7809. He's a little pricey on some things, but I've been able to...
If you're going to spend the bux, AlterKation all the way. Bill is awesome to deal with and won't let you go away mad. I ran into both Magnum Force and Dare at Mopars on the Strip. Magnum force left me with a bad taste in my mouth due to their arrogance. Dare is just a friggin idiot and...
I've been talking to Bob Mazzolini racing. I purchased the 3" inboard kit for the B/E bodies and am planning on using 456/457 B-body springs. I'm told that they work better than SS springs and are much more streetable when needed (especially vs. A-body SS springs). You may want to look them...