Search results for query: *

Looking to buy 2 front hubs for my Scarebird Disc brake upgrade. 5x4" bolt pattern with 9" drum spindles. Old hubs were toast, outer bearing races wore the hub down quite a bit and now its too sloppy. Thanks, Casey

Hey Hey, In the middle of a Scarebird disc brake conversion and my hubs are shot. The outside race on both wheels wore down the hub and are now extremely loose. Is there a source for new hubs?

I purchased the Wilwood Front Disc conversion for A-bodies with 9" drums. Talked with PST and they said the kit should fit with my wheels. I have 15" Steel Vintique Wheels with SBP. The problem is when I tried to put the wheel back on after installing the disc brake kit, the hole in the center...

I recently received the Dynalite Front Disc Brake Conversion kit from PST. for my 63 Valiant with 9" drums. I just started to assemble, and the bracket does not fit on the spindle. To make it fit, i would need to grind about 1/2" from my spindle! Has anyone else purchased this kit and had it...

Greetings, I would like to purchase the Wilwood front disc brake conversion kit for my 63 valiant. I'm asking for help in identifying what additional parts I will need, and hopefully getting some part numbers. I would like a stock looking master cylinder. I'm keeping the drums in the back...

Just put new front and rear RCD Bilstein shocks on my 63 Valiant and the car is now sooo squeaky. Lubed the back because they were harder to get on. They squeak. Didn't lube the front and they squeak. Do I have to live with this?

Lost one of my dust caps on my 63 Valiant and can't find new ones anywhere. Anyone have any for sale? I'd be interested in 2 clean ones as the one remaining is pretty battered. Thanks, Casey

Trying this again. Looking for a complete rear-end for my 63 Valiant. 8 1/4, sure grip. would prefer something in the low 3's so i can maintain decent gas mileage. Looking for something complete with SBP that will bolt right in. Don't want to have to move perches. Live in Northern California...

Looking for an 8 3/4 rear-end for my 63 valiant. Would be interested in spring perches and drums as well. In Northern California.

Car got side-swiped and the bumper was incredibly twisted. Want to buy 63 Valiant Front Bumper. Doesn't need to be perfect, but i'd prefer not to have to rechrome. The car has been restored to have a survivor look so I want a used bumper to match that look. In California.

Hello, The stepped shoulder bolt/screw that holds the throttle linkage to the carb somehow wiggled its way out while i was driving and now its lost. Haven't been able to locate anyone with a replacement. Anyone have an extra or know what its called so i can search for it more accurately. Its...

Hello, I have an electrical problem I can't pin down. - Car used to have trouble starting during the cold weather. I would get zero out of the ignition, i'd have to go to the starter relay and jump the car from there. It started up fine during warm weather, but I had to jump it with a quarter...

I recently had my slant six machined and completely rebuilt. I did the rebuilding, a shop did the machining. It was my first rebuild and I made a lot of mistakes along the way, but I got her running and thought everything was going good until the oil light came on :( I don't remember if the oil...

Anyone have a picture of the #1 Main Journal Bearing that is supposed to have a chamfer? The rebuild kit I have came with bearings that do not have a chamfer and I would like to add one myself to the #1, but don't know which side to add it to where, or how big. Any help would be appreciated...

Hello, I am replacing the main bearings in my slant six and I unfortunately don't remember which direction the main cap faces. One side on both the top and bottom bearing has a small protrusion that fits into a little cutout in both the main journal and the main cap. Does the side with the...

I'm trying to pull my slant 6 from a 63 Valiant without having to remove the drive shaft, transmission and bell housing. i've got everything unbolted, but the engine and flywheel/clutch assembly won't pull away from the bell housing. Am i missing something? i have the tranny jacked up a tad so...

Anyone know where to purchase replacement rocker arms? I have a 63 valiant and was adjusting the valve lash and the adjustment screws on several were very easy to move. thanks.

I am trying to get the paint codes to accurately repaint the plymouth emblems on my 63' Valiant. One color is a Burnt Orange and the other looks like a Pale Blue. Does anyone know what the color codes are, or does anyone have experience using other colors that match? Thanks.

Anyone have pictures of the 1963 Valiant Package tray with speaker cutouts? I'm debating whether or not to put in rear speakers, and would like to see what the package tray looks like with the original speakers. Are there screens over the speakers? What does it look like with original rear...

Its a 1963 Valiant. I am having a really tough time figuring out how to remove the, what appears to be, press on nut holding the squirrel cage to the blower motor. I would like to replace the cardboard gasket between the two. I took out the small allen screw, but can't get that nut in holding...

I have a 63 Valiant with a stock 3 on the tree, and I am having issues getting the the car into first gear. I have had these issues since I got the car a month ago, but it seems like the recent heat has made it worse. I have ATF fluid in the transmission as per the manual, but every shop I have...

Anyone know of a good source for the clips that go inside the headlight bezel of a 1963 Valiant. I am missing quite a few. Thanks. Also, anyone know of a source for the clips that hold the piece of cardboard on the back of the heater box that are not sold in a kit. I just need two.

The plastic bezel on my 63 Valiant is pretty worn, and I would like to repaint it. My dad thinks it should be painted Argent, a matte chrome, but I think it may actually be a chrome. Anyone know the correct finish/paint that should be on the 63 dash bezel?

Bought my first mopar, a 1963 Valiant Signet 200. It was in decent shape, and the first things I am doing is having Safelite come over and replace the front glass and doing the body work to get a new coat of paint on the car. No major issues, some mechanical with the clutch and a pinhole in...

Hello, just joined and just got my first plymouth. 1963 Valiant Signet 200. I am having an incredibly difficult time decoding the fender tag. Under the 1-0 in the first Line: 1:1 2:1 0:2 P Second line, under the Letters: A:1 B:2 H:3 L:1 Q:5 X:1 Last set: SO: 0325 Number: 5024...