Search results for query: *

I'm not to familiar with darts, that's why I'm asking this question. Do all darts have bows in the head liner? Or are there some that have a cardboard type of liner with material glued to it?

Has anyone used the 440 Source stealth heads, if so...how are they as far as out of the box use. Would the be comparable to the Edelbrock E Street heads as far as specs go and out of the box use. They would be going on a 383 with a comp hydraulic roller with I think 559 lift. And I have thought...

Does anyone know where I can get ARP polished stainless 12 point bolts for the BB water pump housing. It seems 440 source doesn't have them anymore. I've checked Summit and Mancini Racing and can't find them.

Looking for recommendations on pistons/rings for a 383 street engine . Thank you for your help

I'm using a Comp roller cam and usually match lifters with the cam, as far as the brand goes. Has anyone used any other brand of lifter with a comp roller. If so what was your combo and how did it work for you. And if anyone had a bad experience with roller lifters, what were they. Thank you for...

On a 68 barracuda tailight, behind the lense...theres a red tunnel like part. It has tabs that fit into the housing and fits between the bulb and the red part of the taillight lense. Anyone know what that part is called and if it comes with new or repop lenses? Looks like this...Thank you you

Will the steering column cover from a 68 dart fit a 68 barracuda, or are they different? Thank you

Has anyone used a fluid damper from 440 source? If so, how did it work.. Thank you

Has anyone tapped out the 3/8 inlet for the oil pick up tube to 1/2 on a 383 when using Milodon pan, pick up tube, windage tray and hi volume oil pump? Thank you

Does anyone remember using static straps back in the day?

Is there any specific paint to repaint the console with. Also, what do you use to sand it down since the surface isn't smooth? Thank you, Your help and experience is appreciated. Joe

Im putting a comp roller in my 383 ,lift is 549. My question is has anyone used anything from summit other than the comp pro magnums. Also what's your preference in oil pans in an a body. Thank you

I'm using a Comp hydraulic roller that's I think 549 lift. Any recommendations on lifters ..comp, Howard's, trick flow, ect. Your advice is highly appreciated. Thank you

Can anyone with a 67-69 barracuda with a big block. Tell me which side the water pump housing outlet is on. Or if one side is easier to access than the other. Thank you

If your running MSD ignition, what amp alternator would work? 60, 75 or 120 , it's a 383 in an a body. Thank you for your help

Rock auto discount code 9515634990634497 I hope this will help someone.

Anyone have preference on cam buttons for roller cams? Is one easier to install than another..such as less shimming or grinding and measuring. Or is there one you can just buy and install right out of the package. What about brands, Comp, Lunati, Mancini, Crane or any others. How about what...

On Facebook...a guy named Jeff Kokur has a new in box milodon center sump, external line oil pan that fits A,B&E bodies. He wants 175.00+shipping, the face book page is " Mopar Muscle and Swap Meet" I thought about buying it but decided to go the traditional route. I tried to download the...

What's the benefit of using an external sump pump set up, versus the internal sump with the pick up and a regular 7qt pan? Thank you for letting me pick your brain. Joe

Ok, this all started with a cam that was warped 15 thousandths ,sent that one back got another one that was supposedly 5 thousandths out. Sent it to Comp. to be straightened, got it back..machinist says theres no change. Called summit, did a little rant..got a third one. Before I get off the...

Has anyone had any problems with Comp cams from Summit being warped. The first one I got from them was warped 15 thousandths. And they sent me a new one that is warped 5 thousandths. Comp says the allowable tolerance is 0-3 thousandths, just wondering if anyone else is having or had problems...

Guys ya'll have a lot of fun in Carlisle, I was hoping to go this year and at least meet some of ya'll. But I can't see it happening, so ya'll take pics and post em for me. Joe

Has anyone had a problem with tight fitting cam bearings on a 383/440 that required additional honing, buffing or machine work. Does a roller fit different than a stock can. I ran into this at the machine shop and wondered if anyone else had this problem.

Does anyone have a pic of a wiper motor for a 68 barracuda. And does it have the 1/4 inch shaft or the larger shaft on the back where the arms connect? Thank you ,Joe

I have ordered 4 wiper motors that were supposed to be remanufactured A1 Cardone part #40350 from various places. And every time the part comes in, it's cardone select part #85350 wiper motor in the box. Does anyone know where I can get a rebuilt wiper motor for a 68 barracuda?

Has anyone bought a wiper motor for their car from Rock Auto? If so, any pointers as to which one is a better choice? Thank you for your feedback.

I bought a drive shaft that's supposed to be out of a 69 barracuda. I think the length is supposed to be 44.88, and there is a number where the u joints are that is (I think) 2883630 and "detroit" I can't find that number anywhere on the web. Can anyone help me out, am I supposed to measure the...

Will the driveshaft from a 69 barracuda hatchback with a 383/727 work on a 68 barracuda fastback 383/727 ? Or is the wheelbase longer on the notch. Will any of the parts off the 69 notch work on the 68, vent window frame, springs..stuff like that. Thank you

I'm trying to decide on what color to paint my engine. The car is going to be green, I'm thinking either hemi orange, red or an aluminum color. Any pics or suggestions are welcome.