Search results for query: *

I have recently sold my car and no longer need these. I purchased them from another member here he had them on his 66 drag car and after a few passes went back to fenderwell headers. They have only a few passes at the track on them, the have had some 45 degree pipes welded on them and some small...

I am looking to trade my Dart for a full size Jeep Cherokee 2dr wagon. The car is a project car which needs some body work, V8 install is complete as is disk brake conversion. Has nice custom interior and some extra parts which include a set of uninstalled spitfire headers and a Ford 8" rear...

For sale 1965 Dart 2dr post slant six(225) auto runs very well needs fuel tank. Very solid car has tons of potential. $1000 obo Has damage to left front fender and very small patch of bondo in the right rear lower quarter. Also needs some interior work. Could be driven with a fuel tank.

I have 2 cars for sale a 65 Dodge Dart 2dr post with 225 slant and auto, and a 66 Plymouth Valiant 2 dr post with 170 slant and 3spd manual. Both are project cars. I am asking $1000(clear NM title) for the Dart and $250(NM bill of sale) for Valiant. They are located in Melrose NM. PM and leave...

Its nearly time for wheels and tires for my 65 Dart, and I cant decide on which wheels to go with. I really like the Torque thrust Ds in a 15x7, but was also looking at some with sort of a modern twist same style but gunmetal gray in a 17x8 rim. Any suggestions or maybe some pics of what you all...

My buddy has this bike for sale or trade 03 Suzuki Boulevard 1500 for info on this call him at 575-799-4694 ask for JIM the bike is in East Central NM 88124

Anyone have a 63-66 a body gas cap in good useable condition. Someone stole mine, while parked at Autozone. I am really beginning to hate that place. Thanks

Would a manual transmission from a 3.9l work with a 273, I think its a NV3500, but not sure? My brother in law has a wrecked 88 Ram 1500 with a 3.9 and 5spd tranny, I was wondering if the tranny would work in a 66 Valiant, and what mods would have to be done? If not are there any 5 speed manuals...

Any ideas what a 72 340 shortblock is worth?? I pulled it out of a car a while back it appears to have been bored 10 over, it was running before I pulled it. Im looking to trade it for some parts, just curious what it would be worth.

1969 DODGE Dart. 2 door hardtop. Automatic, V8. $5,900. 575-799-3004, 575-389-5494 This is not my car I found it in the local paper. Talked to the owner on the phone he says its rust free and he is the 2nd owner, and it has a 318. If anyones interested I could go and look at it and take some...

I am wondering if the tail sections and output shafts of early and later 904s are interchangable? I am rebuilding my 65 904 and would like to switch to a slipyoke. I was thinking that if they were, that would be a good way to do it, since it will be out of the car anyway. Then I could just use a...

In need of a Ford 8" center section with 3:40 or lower gears. Thanks

Before I buy a new one thought Id see if anyone has a good early A fuel tank with sending unit for sale. Thanks

Does anyone know what the difference is between the early and later A body fuel tanks? I recently purchased another early dart and the tank is rusted out, will a tank from a 68 work are the fuel filler necks different. I see there are two different grommets available for early or late, but some...

You know when I first got my 65 Dart I wasnt sure about it, but now I am early A crazy. I found another one on Craigslist last night and I am going to look at it tomorrow its a 64 2dr post with a 225 and an automatic. The pictures look pretty good, ifits half as nice as the pictures I will most...

Anyone have a throttle linkage setup off of a 318 with 2bbl carb, I need the rod, spring and clips for my nephews 75 W100.

I am looking for an 8 1/4 rear end in the OK, TX, CO, NM area. email [email protected] or call 575-253-4705 or 575-799-4288

I am looking for a complete 8 1/4 a-body rear end with 3:23 or 3:55 may consider 3:91s within a days drive of west Texas or Eastern NM, I bought a Ford 8" that will fit, from an early Mustang, I just cant bring myself to put it in.

Has anyone tried the Hei style distributor that just hooks to the coil for smallblocks, thinking about upgrading from points. It appears to be the same style that 440 source sells for the big blocks. Anyway just curious how well it would work.

Over the weekend I was working on my car and while working on the motor I noticed an International Harvester symbol on the block. Whats the deal with that ? Its a 318 casting date 6-22-1977 I pulled it from a 78 Plymouth cop car. Any ideas?

Tomorrow I am going to attempt my first cam swap in my 318 any tips or tricks that may help me out?

Anyone running aftermarket a/c in their early A? I am currently shopping for a/c for my 65 Dart any suggestions?

I am doing a few mods to my 318. It was recently rebuilt to stock specs .20 over. For a cam I was thinking of the Crane energizer 272 with .454 lift or the Comp high energy 262 .462/.470 lift. I am running fresh 302 heads with new springs that will handle up to a .505 lift and 1.88 and 1.60...

Anybody know the specs on a stock 2bbl 318 camshaft, duration and lift?

We are thinning out some of our cars. I have a 1975 Duster w 225/6 big bolt pattern factory a/c car. This car runs and drives very well infact I have driven it to work several times over the last few months and its a 75 mile round trip. Overall a pretty straight and solid car has a little rust...

What should I expect from a 225 as far as mpg goes? I have a 75 Duster that I am going to start using as work transportation. I just gave it a tune up and it is running great. It has dual exhaust with a single bbl carb. What do you think it will do? I am hoping it gets better mileage than my...

I am in the process of swapping my /6 for a 318. I have some 273 motor mount brackets will these work or will they require mods? Also will a 67 tranny mount work it has one stud instead of two, other than that they seem very similar? Also on the early As is the transmission supposed to rest...

Does anyone know where I can find a new tranny mount for my 65 Dart? Thanks in advance for any help.

I was under the impression that my 65 Dodge dart had 66 taillights, until I saw another 65 with the exact same lights. Does anyone know if 65 came with the lights without the clear centers? My look identical to 66 lights, they are just flat and red. I was thinking since some cars didnt have a...

I am thinking about keeping my slant six until it dies and then swapping to a V-8, although I have all the parts to do the swap. I just cant bring myself to pull the old six becuase it runs so well, but I want to swap my 3 speed manual to an auto in my 65 Dart. Will I have to find a 65 model...