Search results for query: *

Moparbrit here. Received an email about buying the book that 74 Dart' put on my old thread. I've copied my reply and suggestion to the sender below for any others who might be interested. Please note. MY BOOK HAS SOLD LONG AGO AND DELIVERED. To 74 DART' no problem posting on my sale...

Sold to partmopar. Thanks Shipping 5/6/10 media mail label number 420761489102150134711162796547 Cheers, Virg

The one and only bump. Really is a nice book just full of pictures etc.

Having a bit of a clear out and thought I'd offer this great book here. The book is a colour history of the Dart and Duster musclecars. Full of info and large photos of Darts and Dusters. Lots of info for the restorer and great pics showing detail shots. Has factory ad pictures in too...

Look for the simple easy stuff first as outlined above. Keep in mind also that I've read where the balancer ring can spin and not be correct. If you have not, check top dead centre at the piston and then compare to the balancer mark to see if it is way off. If it is, then you can put your own...

Thanks for the reply. I don't know why I'm not getting notices that people are replying as I thought I subscribed to the thread. Anyway, wow, $300 is a chunk of change! Might have to rethink costs a bit then if the feeling is they are worth in the $175-300 range. Of course, the old saying is...

Thanks for the reply. I like the look of this style seat too. Just not going to be able to do anything with them sorry to say. Thanks for the input on the value. I probably need to post again in the for sale section then or do you think eBay is a better place to put them? If I said then...

Giving this a bump to see if anyone can help. Perhaps needed to be posted in the parts for sale section, but as a query I wasn't sure. Mods, if it needs moving feel free to do so, thanks.

Hi everyone. Been a while since I've been on. Looking for some help on a pair of bucket seats that I have that I'm going to need to sell. I seem to remember them being '73 or '74 Duster seats, but memory is not what it used to be so I'm sure someone can chime in and confirm for me. Was...

If your '71 is like mine you will not have the round connector, but rather two flat connectors that push onto the pins at the back of the dash one on each side. The fuel and temp get their power/signal from being connected to the dash using nuts on the studs. The signal/power/ground is all...

Thanks. I may end up trying to get some from Home Depot if it will work for a car. Contact so far with the other two sites they don't seem interested in selling small bulk rolls. Just precut tint packages (some through distributors) for cars from about 1980 up. Looked at Gila even. They...

Hi, Thanks for the reply. Yes, had already thought of the light transmission. Our taste is for what we used to call the legal tint all around. Used to be rated at 35 percent light transmission. Not into extremely dark cars. Just something to cut the UV and give a bit of glare cut and...

Wanting to tint the windows on the Dart as with the elevation and sun we get the wife is concerned about skin cancer and also wants to cut some of the heat out. I've applied tint before so all, but the back window should be easy. The question is...where can you buy good quality BRONZE...

I may be interested. PM me with condition and what you want for it. Supposedly I have one on the way to me as we speak, but remains to be seen what arrives:-D I should know for sure by next week. Cheers

Just a few points to make sure you get an accurate base. In the process of doing the same thing to a standard Dart. I would verify what gear is in the rear now, tyre size and make sure your speedo gear is the correct one. No sense in jumping through hoops trying to get mpg maxed when your...

Hi, Thanks for the post. Unfortunately the cable is too long on the Slant one barrel application. Need the sorter 318 one. Thanks again! Cheers

That was fast. Might have a new one on the way. I'll know in the next day or two. If you have one that matches what I need then please still email me as it pays to have a back up plan and I still may end up needing one. Cheers

Looking for a '73 or '74 Dart 318 2bl accelerator cable. Has a ball end that goes on the pedal and the round metal part held with a clip on the firewall/bulkhead. Just needs to be working smooth and not damaged ie needs to be useable. If you've got one email me and let me know. Condition...

I'd verify state of tune, fuel mix, etc. Most stats begin to open at a certain temp and are fully open at a higher temp. The giggle valves or small holes in the stat are good for allowing air bubbles to be displaced out of the engine into the radiator where coolant top up will take care of...

Hi, Thanks for the reply. I went ahead and sent you the funds back. Supposed to be MSD chips and that is what my faulty memory thought they were. If they are Autometer chips then I can only think they were in the shift light I had although that same foggy memory thought the light I had was an...

Hi, Just want to make sure my email and PM's are going through. Drop me a line and let me know. For the NP's reading this:-D.... sold some MSD chips to crackedback. Paid no problem, shipped and once arrived emailed as they did not look right. Said they might be Autometer. I had and...

Anyone know a source for the jets for a Holley 2280 type carb? The jets in it are smaller than the standard old 4 barrel or Holley 1920 two barrel type carbs (which both use the same sort of jet). Not started tuning it yet, but realized the jet size difference and so putting it out there to...

Look into Yellow Freight. They have a pretty good coverage as far as terminals. Been a few years back now, but had an engine shipped from California to here that way. Seller drained the engine, wrapped it in in plastic wrap and card board, strapped it down to a used pallet (probably liberated...

Great, Thanks! Every little bit saved helps. Cheers

Bit of a cheek I know, but funds as tight as they are, about to put in a bit of an order with Rock Auto. Anyone got a current discount code they would like to share with me? I had one, but it has run out. You can PM me if you like rather than post. Cheers

Always loved those cars. Guess I have a thing for tiny cars what with all the Minis. Really like the look of them when used for drag racing from way back. Of course, at least for me, like the Arrow, Gremlin, Kadett etc. as drag cars too.

Alternatively, if you can stomach putting a GM part on, you can put in the electronic dizzy and then use a GM HEI module to run everything. Gets rid of the ballast resistor all together. Make sure to use a non ballast resistor dependant coil. I used an MSD Blaster 2 coil...

I thought I saw something about the USPS offering a certain value coverage on some of their parcels now??? Probably dreaming or they've changed it again along with all the other loop holes, size and weight requirements etc. that all cost more and more. Don't even get me going on International...

Sorry to hear that. We've emailed a few times back and forth about carbs, knees and health in general. Really a great guy! Hope all goes for the best. Cheers

Try this: http://www.allpar.com/history/mopar/electrical2.html