Search results for query: *

Do I need to change my Master cylinder pushrod rod for a '65, to convert from a single to dual reservoir Master Cylinder?? It was suggested, but the original in my 65 dart manual brakes looks to hit the '67 MC just right, in the same spot. If I don't need to change it, will just put a new...

The one I have will work, if I trim the rust and swap sides to move the trimmed side to the top. I'd like to go with a better one if I can find it. Pm me if you have one you can let go of.

Looking for the shouldered caliper mounting bolts for my KH disc conversion. I have some new ones without the long shoulder, but would prefer to find the original styled 7/16 fine shoulder'd bolts. PM me if you have a pair you'd be willing to part with.

Looking for the shouldered caliper mounting bolts for my KH disc conversion. I have some new ones without the long shoulder, but would prefer to find the original styled 7/16 fine shoulder'd bolts. PM me if you have a pair you'd be willing to part with.

The one I have will work, if I trim the rust and swap sides to move the trimmed side to the top. I'd like to go with a better one if I can find it. Pm me if you have one you can let go of.

Read a lot on here over the years related to disc brake conversions for my 65. Was told way back in 2002 how todo the conversion on the 62-65 list. Time and money combinations of availability have always been the challenge. In October, I started to get a front wheel cylinder leak just before...

New skins from legendary, seat pads, carpet backs, carpet, canvas, muslin and then to have the seats restored has a fairly hefty price tag for the household budget. Will be awhile to have the cash on hand todo it. Try to find lowback bucket covers that look decent is a challenge as well. I...

My original Carter carb hasn't had choke butterflies, nor anything hooked to the hear riser since 1975 or before. The first intake gasket I changed had a solid gasket on one side of the crossover, which I've continued to block off with any intake gasket change. The heat riser defaults to...

The last time I bought points for the dual point was in 2002. The block had fallen off. I went to all the shops in town at the time. The Echlin CS721A were what I ended up with because they matched the points I took out of it perfectly, same heavy duty spring, same metal and all. Blue...

Does anyone have the Dorman or any other part number for the thinner pilot shaft bushing for our 273 forged cranks? Years back, both bushings came in the clutch kit, but now only the thicker one is included. Thanks for any help or advice you can offer.

I probably picked this up 10 years ago when I was thinking about putting a second Dart together and never used it. I figure $100 or offer for it all, plus shipping from las vegas. Floor shifter seems to be in decent working order, it seems to match the pitting on the console. Console has the...

These have Been kicking around the garage for a few years. If you want them, $80 for the set, plus the ride from Las Vegas.

I have an 8-3/4 Cone type center section with 3.55:1 gears. Gear date is 7-27-68. I put about 1500 miles or so on them before toning it down a notch with some 3.23s, and have no need to store it. Had no issues. Asking $550 plus the ride. Would prefer local pickup in Las Vegas, or I'd even...

I have a D4B That I ran for a half dozen years on my 65 dart. Asking $250 plus you pay for the ride. Same deal and price that I bought it for. There are 3 studs in it that were sized down to 5/16 to fit the original style 4bbl. Which is what I ran on it. If wanting to run a wider square bore...

Like @63dartman I haven't posted in a long while. I log in every so many months when I see a notification from one of my old posts. I've been occupied with life events and haven't done much to my Dart other than park it about a year ago when the rear started making a bit of noise. In 2013 I...

I have Two 1966 Dart Instrument Clusters with guages. I do not know if they work or not. $100/Offer each plus shipping. Edit: Lower cluster has been sold.

I picked this up for my dart awhile back, but ended up keeping my 10" setup. New/unused Rhinopac Clutch set, part#05-029. 10 1/2" 23 spline clutch set. $125 shipped to US.

I was up to my dad's hous to help him out after surgery, amd while I was there he gave me an old bike he rescued from going to the thrift store a few years ago. It was a bit rusted up on all the bright work, so I put a fair amount of polishing in order to make it shine. It splits in half for...

Found one and will be picking it up tomorrow. It may end up being a wall piece, until I decide what todo with it ;-)

Well, I finnally get to check the 'Get Radio working with Decent music' Item off my list. My wife ordered one of these for me today on amazon. http://www.isimplesolutions.com/TranzItBLUHF/ What's on your list that you can afford for fathers day?

I have a complete 5.7 Hemi i picked up, originally from a 2004 Durango. Asking $1400 for the Everything. * All Accessories bolted to the engine are included. Injector harness, coils, Alternator, Starter, AC pump, PS Pump, pullies, tensioners, Air cleaner, etc. * I have not run this engine...

I have a pair of 14x7 Cragar wheels that won't fit mi 65 dart. These wheels are in decent condition. The chrome on the spokes and steel portion of the wheel is in good condition, but there is a little pitting and peeling between the spokes. DEFINITELY not show quality. Asking $150 for...

I've rebuilt my rear window regulators on my 65 dart twice now. The first time both sides were pretty much bent in a circle. THey're pretty weak and are about ready to need to be tweaked again I have access to some from a '66 Hard top, but, I before I went thru the effort to pull them, I was...

I've been toying with the idea of making a drop-in speaker tray for the top-well that I can utilize the bracket across the back seat and just hook them up and lay them in when the top is up. Maybe could possibly build them to also sit up a little higer so they can sit on the top when it is...

Thought I would post one for Darts to go next to the Barracuda's Thread. Attached are a few more recent pic's.

A guy in the local club offered to sell me an '65 fan shroud originally pulled off a Formula S. He says both pieces are in excellent condition, but wont give a price, wants me to offer. I have no Idea what they are worth. Any thoughts on what I should offer?

Since getting the dart moving again, I've been hearing some noise in the trunion joint at the front of the drive shaft. No vibration, but a little annoying. Does anyone have a source for a A-body B&T rebuild kit? Atlas Obsolete on e-bay seems to think they are gold-plated or something at...

Have a set of 7 1/4 3.23 gears and wondered if anyone was interested.

I have a set of used 3.23 gears for a 489 center. I picked them up awhile back that I'm not going to use. So I am selling them here. $100 + Shipping

Having difficulty finding a green 20 tooth speedometer gear for 65 & older style. Anyone know where to find one?