Search results for query: *

I will be at the Indy swap meet next weekend and can pick up.

I have a set of aluminum heads that I am building, and when measuring for Installed Height, I get 1.920; the spring recommended for my cam has an installed height of 1.8", So I am off by .120", but I will use a .060 spring locator, which leaves me .060 left. Can I run a shim with a locator? Is...

I don't do much with cast iron heads anymore, but I am freshening up a set of heads on a Jeep and would like to put positive seals on it. I hate to buy one for just one set of heads. I have the correct arbor need the cuter. Any help would be greatly appreciated.

I am building a stroker 340 with a set of trick flow heads. It's a Molner 3.79 stroke with their H beam rods and Wisco forged pistons. The compression ratio is going to be 10.6:1. OTB Trick Flow Heads with Hughes 1.6 rocker arm. I have an Edelbrock air gap and Victor Jr for intakes (Any input...

I have a Saganaw pump from CVF with a stock gearbox and stock steering components (Not rack and pinion). The power steering seems too good. I feel like I am one sneeze from putting it in the ditch. I would like more road feel and a little more effort to steer. I have used pressure reducers on...

Anyone have a 71 duster LH fender for sale. Can be a new AMD or a good used. Preferably located in the Midwest for easier pickup Thanks

I have a few Milwaukee tools for sale and will be at Carlisle this weekend. I am not a vendor but can meet at my truck for pick up. I am cross posting these as well. M18 Fuel 1/2 impact Used, Tool Only, $150 M18 Rover LED work light Used but like new, Tool Only, $65 M18 Brushless 1/4" impact...

Hey everyone, I have a 71 duster with tubular upper control arms with the bigger ball joint to accept a disc brake spindle. I have a pin type caliper bracket and 73 duster rotors. The rotor is rubbing on the caliper bracket and the inner pad does not fit in between the rotor and caliper bracket...

I saw this on an engine for sale on FB marketplace, and I had never seen one before. I sent the guy who posted it but he neve responded to me. I would love to learn more about it, so if you know anything about it, hit me up.

Putting together a small block stroker motor. I need to purchase fasteners for the heads. Going APR but curious if I should go studs or bolts. Is there any disadvantage to going with studs?

Ok, i am going with a ATI balancer and they interfere with the timing tab of the later covers. I can modify the timing tab or I can use the older cover with out the timing marks. I guess I have never payed attention to the set up on the older models. So if I go with an older version without the...

Which ATI balancer is everyone running? Do I want steel or Aluminum. I know I want Internal Balance because my new engine will be internally balanced. When I look on summit it seems there are too many options. Engine Specs: 340 block Molner 3.79 crank Molner H beam Rods RaceTec Pistons Trick...

I have the plate but need the bolts. Thanks in advance

I am building my first hydraulic roller engine and I am curious to know what procedure to use to determine pushrod length and correct geometry. In the past on a hyd flat tapped, I made a mock up lifter and set it to the preload spec and a adjustable pushrod to get my length and to check the...

Does anyone know what the length of the valves on a stock assembled edelbrock head are? I'm curious to know if they are stock length or the .100 longer chevy valves. Thanks in advance

I have a brand new set of Howard Cam Hydraulic Roller Lifters part number 91764 that I would like to trade for a new set of solid roller lifters

I have some 4.060 pistons and rods that I want to use on a engine and debating on a 340 or 360. I would prefer to use the 340 but it seems to be difficult to find a 340 in either a standard bore or a ready to go .020 340 (4.060 bore). I could use a 360 but curious if anyone has issues with their...

I am looking for a 340 in standard bore or .020 over that is fresh out of the machine shop. Located in Illinois but willing to drive a reasonable distance to pick up.

Ok, its been a while since I have had to do this so I want to make sure I am doing it correctly. I recently bought a set of Edelbrock knock off heads from a buddy for my SBM. These heads have been heavily modified with porting and such. When I put a micrometer across the valve margin I am...

I am going to remove the engine and trans with the Alterkation K member. This will be my first time doing so. I plan on building a cradle but not sure on a design. Any advice? Pics? Thanks in advance

Title says it all but looking for a manifold for my 340.

Hey everyone, I am building a 440 and I have a set of SRP forged pistons on a set of 6 pack rods. I also have a set of Eagle H beam rods. I would like to put the SRP pistons on the H beam rods but my machinist is hesitate about pressing the pistons off in fear of cracking them. Has any one else...

Can anyone help me ID these 440 rods? There is no branding on them and these are the only numbers I see. They were in an engine I disassembled.

Looking for a small block Victor Intake for sale.

Hello to all you mopar experts. I have a 833 and for a while now I have had a leak out of the tail shaft seal but have been living with it. I have replaced the seal a few times to no avail. Yesterday I was in a driven line shop getting a new driveshaft made and he told me my slip yoke was no...

I am putting a triangulated 4 link in my 71 duster and I understand all the geometry for a 4 link but I am wondering if there is an advantage of having the top bars angle from the center of the axle to the frame rail over having the bars come from the axle to the center of the vehicle via a...

Long time Mopar Nats guy first time Carlise guy. What do people do in the evening there. Are there meet up places if so where at. Not taking a car since it's too far to drive it. What are the must do's? I am sure its big and I want to make sure I hit the hot spots.

For sale are American Racing wheels with tires that have less than 1000 miles on them. Tires are a staggered size with 205p60/15 for the front and 245P60/15 for the rear. You can see the wheels in my avatar. I am located in Joliet illinois which is 50 miles south of Chicago. Asking $800 obo...

for sale a set of American Racing Hopter wheels and BFG radial TA tires. Wheels are 15x7 and 5x4.5 bolt pattern. Tires are staggered with 205/60R15 for the front and 245/60R15 for the rear. These were on my duster and fit without issue. Tires have less than 1,000 miles on them. Asking $1150obo

it was time to ditch the 15x7 and move into something different. 17x7 in front and 18x9.5 in the rear. Minitubed, shortened rear end, moved axle back, relocated springs and reworked the wheel lip in the front. Based on the reaction at a big show over the weekend it was worth it.