Search results for query: *

loooking for FREASH AIR DOOR AND HING COMPLETLY FREE OF RUST AND INTACT AS ONE PIECE WITH MOUNTING RIVETS TO BOX WILL BE REPLACED LOOKING FOR THIS DOOR AND HINGE FOR A 1965 BARRACUDA

I'm just curious my interior trim that does along the bottom of door do I run carpet fully to frame of door or cut short just enough to for screws to clear and go into holes . The first photo is me pulling the carpet back so that it will clear the holes or second picture is not clearing the...

I have all the splash sheilds but just missing actual metal piece

I really couldn't tell you . I got hold of this project with a bunch of missing parts and a lot of work to be done and found . I've been looki g for a parts catalogue on the inter web . For a 65 barracuda or 65 a body Mopar . Year and model specific I'm doing all kinds of research for these parts

That would be awesome if you had both of them but if you got anyone else you know of who has a parts car . That's gonna let pieces go. Let me know and if anything what do you want for the one you have

I am looking for the splash guards that go behind the headlights in the front wheel wells on the driver side and passenger side for a 1965 Plymouth barracuda I have the rear splash guard up along with the rubber strips to seal it but I am having no luck on finding the front splash guards in the...

I'm not sure at this very second I'm not at the shop I'm at work right now but I need enough for those two trim pieces that are on the rocker panel that goes from front tire to the back tire I know those all need to be replaced because they are all broken so at least at least 10

Hey wouldn't know anywhere to get those I am seeing something similar but the size is wrong and it's on a Mr gs website with all kinds of clips and stuff just not finding the right size .

I have the rear splash guards and seals on already I am currently on the hunt for the front wheel will splash guard that goes between the headlights and the front wheel I have the seals for them just not the guards themselves anyone have any idea on a location of some eBay or websites. The...

On the 65 barracuda the eclipse that hold the bottom rail underneath the door that goes from the front tire to the back tire what are those clips part numbers and what are they called specifically I have a couple but the old ones are a dry rotted and broken here is a photo of what I am looking...

I finally figured it out and yeah I seen that I had enough for forehead lights I did figure it out and I appreciate it dearly but I do have another question I have these clips right here that go down the bottom side trim piece that goes underneath the door from the front tire to the back tire...

Anybody with any tips or pictures on how to install these headlight adjusters on the 65 barracuda pictures and tips would be awesome

I've seen that people are saying when I put the 360 la motor into this car they are changing the suspension on the front and rear because of possibly the weight maybe I'm not sure first time ever doing a motor swap so this is all new in educational to me

So I've been trying to find the right water neck and I can't seem to order right size anyone want to come in tell me what's part number. I'm looking for a short strong one. The blue one is original could I just get away with cutting it shorter . The center of bolt holes is 2 7\8 and idky I get...

I'm running only the alternator and waterpump plus crankshaft what size belt goes on the stock 360 la need some guidance .

It's got a single set of holes for the smaller water neck thermostat the other motor that is in the shop I'm at is a 3 18 and has the Edelbrock with the two drilled set holes for the smaller and larger water neck I just need the size of the smaller water neck please and thank you

I've got a 904 3 speed tranny ND I javelin also gotten a champion cooling radiator would anyone be able to help locate the right size cooling lines for the 360 la small block v8 motor and 904 tranny going into a 1965 plymouth barracuda originally a slant 6 any link to exact part just a part...

I believe inhale a 360 la small I am looking for the water neck and I believe the regular 360 not the la , but the water necks are same size but the 360 la water neck us smaller than the 318 and regular 360 v8. Can I get a part number for the water neck . I hate getting wrong parts. Sadly I just did

Not missing just not on yet . I appreciate it guys

So I am curious as to what this is it's beside my distributor I wanna say it's just a rubber stud to hook one of the springs . Idk any info would be appreciated

I've searched eBay high and low Can you get the link and send it to me

They come out of a 1965 plymouth barracuda

If anybody could help with a part number or a website link 4 the J rods that hold the heater box and fresh air box to the Mount of the dash underneath

The build I'm doing is a Plymouth barracuda 1965 it's got a 360 la small block going back in it from the original slant six . And it's getting the 904 transmission 3 speed auto . I'm just trying to get a good idea of where I should Mount the new 21 circuit wiring harness I have removed if...

Where would be the best place to run my electrical from under dash I have a 21 circuit new harness everything is dumby proof. Just want a idea of where to locate it and how do I go about closing the old bulk head off . Just a small piece of metal over it and boom done. Let me hear it yall new to...

Thc you

Here are some pics of numbers on my tranny can anyone help identifity the trannt. Iveen told its a 904 auto here are some pics

Okay I have a 360 la motor with the 4 banger edelbrock carb with a 1 spacer I javelin cables for throttle and kickdown on its way . So my question is I need fuel lines and water lines and I've never worked on a mopar or chrysler I'm new to the whole resto down to the bones. I'm wanting to know...

Just do what I did to get my filter on I got a remote oil filter location and it lets me get another quart of oil in there.

Okay I need a driver side torsion bar I believe it's even numbers if I'm not mistaken the picture of the single torsion bar in my hand is the passenger side torsion bar. I'm only looking for a driver side please and thank you they are for a early a body 1965 plymouth barracuda.