Search results for query: *

Hi folks! I have a '75 Dart Sport, and there's a '74 Valiant (4 door) about an hour from me. Are the sun visors the same in hard top A bodies, or are there differences between sedans, coupes, etc? Thank you!

Hi folks, The car I'm working on is a '75 Dart. I'd like to find a few old door or trunk lock cylinders - or the pin sets from some - so I can rekey my door locks to match my ignition. I tried looking at small sets of pins to buy but I'm not sure of the particular type I would have to look...

Are the factory wire colors for the newer Dodge, Chrysler, Jeep, etc. the same as the older A bodies? I'm thinking of using a fuse box from a newer vehicle with blade fuses and just curious. Thanks!

Hey guys, I picked up some A Body bucket seats with tracks, but the tracks are for 1974 and prior, and I own a '75 Dart Sport. Does anyone have the driver's side inner seat track for the '75-'76 A Bodies that would be willing and able to get a measurement or two for me? I found a user who had...

Hi folks, Looking for a driver's side seat track like the one pictured below. Thanks to @H22A4 , I realized that I have the incorrect inside track for my '75 Dart Sport. I'll consider a pair if you don't want to break up a set, but really just need the one track. If I can't find one, I guess...

Hey guys, I lucked into a set of '75 high back bucket seats for my Dart, and the tracks were separate but included. I parted ways with my original '75 back in 1988, and I only spent time in the driver's seat, not the passenger, so here's my question: does the passenger side seat adjuster lever...

Would I be correct in assuming that any of the stock exhaust manifolds for an early 70s 340 will flow better than the mid 70s and late 70s 360 stock manifolds? I have a chance to pick up some 72 to 73 340 manifolds dirt cheap. Since I'm building a daily driver I'm going to ditch these awful...

Hey folks, I searched but didn't find what looked like a definitive answer. What is the OEM part number for an A body (1975 Dart Sport) 26 inch radiator shroud? I picked up what I thought was a 26, but is actually a 22. I'm going to look at a place that has a few, but want to make sure I'm...

Hey folks, (Car is a 1975 Dart Sport) Long story short, I offered to help a fellow Mopar guy by sending him a tracing of the trunk divider that came in my project car since it was lying loose in the trunk. My question is, does that chipboard divider go on the backside of the bracing (so you...

I am looking at these fans for my '75 Dart Sport 360, which will be a standard street driver. The measurements will be pretty easy to massage into the space, just wondering what specs I may not be considering. The fans are from a 2008 Jetta, and I can pick up the other whole assembly for $50...

Hey folks, I'm at my local pull a part and happened to see some very nice bucket seats in a 2010 Honda Accord. Does anyone know if they'll fit in my '75 Dart Sport before I get them? Thanks!

Hey folks, My project car came without part of the kickdown linkage: I have the part that connects to the carb and the manifold bracket (bell housing bracket?), but I'm missing the lower parts. I have a '75 Dart Sport, 360/904, and it does not have a manual valve body...so far as I i can tell...

Hi all, (Editing to add: car is a '75 Dart 360 Sport) I just found two good sets of stock exhaust manifolds for my 360 (current headers are abominable and since I'm building a street/daily driver type, I don't know if putting $1,000 into TTIs is the best route), and a good price. I'm wondering...

Okay, I have no idea what forum this question actually belongs in, so here goes. I would like to restore the bumper jack that came with our project car - a '75 Dart Sport. It will give me something to do while waiting for our garage shop to be built. I don't think I will ever use it, but I'd...

My '75 Dart Sport project car came with '72 Duster doors, but a local racer said he has a pile of 73-76 Dart Sport doors and he would trade me plus throw in a little extra. Sweet...but I had to pick the best two out of the pile and I have no idea how to tell what year they are. I read on the...

Hi guys, (Car in question is a 1975 Dart 360 Sport) I FINALLY got five minutes to work on our new-to-us project car, nothing crazy today, just charging the battery and other minor things I could squeeze in. I noticed this problem when we bought the car and put it out of my mind until I could...

Hey everyone, I found a set of 360 fender emblems to replicate the Dart Sport I had in high school, but the fenders I have are from a slant 6 car and don't have the holes for the 360 pins. Can someone tell me the factory location? Either the distance from the "T" in "DART", or the distance...

Two questions: 1. Size and style of the headlight bezel screws for a 1975 Dart? 2. Size of the screw for the headlight bezel of a '72 Dart, but just the long one at the top outer corner. Thanks! I did a search here and only got a hundred posts about missing bezels, and Google keeps trying to...

I'm just curious how they look in the grille of the Dusters/Dart Sports. Not the visible lighting, I've read a lot of reviews - I'm curious if the extra bit that they extend in front of the retaining rings is horrible or acceptable. I have the chance to get a set at a really good price, but...

I have discovered, as many of you have, that the rubber bumper strips are not reproduced - at least I haven't been able to find any for the '74-76 thin bumperettes. However, in a past life I ran my own mold making and casting business, and it occurred to me that I would be able to get one of my...

Brothers, sisters, and all the other fauna whom I don't know how to address! What is a safe, relatively easy way to remove the chrome plating from the cast aluminum rear trim panel and tail light surrounds found on the Dart Sports? They all have some degree of pitting, bubbling, or other...

I wasn't sure which forum this fit in, so I'm putting it here. Does anyone reproduce the rubber strips for the bumperettes on the thinner 75-76 Darts?

Are the shock style bumper mounts from a '74-'75 Valiant interchangeable with those from a '75 Dart? Are all the shock mounts essentially the same, from '74-'76 Plymouth and Dodge?

Oops, wrong forum. :(

Hey folks, If my question is in the wrong forum, let me know! I've actually asked on a few Facebook media blasting group pages, and got some answers, but unfortunately none of the answers was to the question I actually asked. Go figure. :) So, I recently got a small blast cabinet to clean...

Now that I know what I'm missing, does anyone have spare door hinge bolts? I need two with the large washer, four with the smaller washer, shipped to 29044. I know eBay has full sets, but I really don't want to have spares lying about after paying almost $40. Editing to add: As OldManMopar...

Now that I know what I'm missing, does anyone have spare door hinge bolts? I need two with the large washer, four with the smaller washer, shipped to 29044. I know eBay has full sets, but I really don't want to have spares lying about after paying almost $40. Editing to add: As OldManMopar...

A question on hinges: When I got my Dart, the door hinges only had one or two bolts on the pillar side, and on the door side as well. I have rebuilt the hinges and got some hinge bolts from a local friend, but I'm still short. The problem is, I don't know which ones I'm missing. I found a...

Hi everyone, In the next week or two, I'm going to start sanding body panels to get ready for body repair, primer, filler, paint and all that. I have a pretty good random orbital sander but I've seen so much lately about the Eastwood SCT. For those who have used both, which would you recommend...

I'm rebuilding my upper hinges on a '75 Dart. I realize this part of the hinge assembly is probably to keep the door from overextending, but every single picture I have seen on Google and sale sites shows the hinge without this part. Opinions on keeping it versus deleting it, before I drive...