Search results for query: *

In the process of completely rebuilding my 67 Barracuda and decided the old gas pedal looked pretty worn. So, I purchased a new pedal and it came with all the hardware to install it. The hardware includes a metal pin, c clip, two plastic inserts that the pin goes through, and the spring. Well...

Try Auto Rust Technicians out of Cramden Rhode Island. That is where I got mine from.

Perhaps remove the splash shields behind the tires???

Last time I saw an OEM quarter on ebay was about 2 years ago and it went for over $2000. Putting the skins on my 67 right now. Not perfect but it sure beats the patchwork someone pulled on the car years ago when nothing was available.

RestoRick also carries them: http://www.restorick.com/products.asp?cat=1&pg=2 Kirk

Nope, closest we can do right now is buy one for a Dart and work it. I was told the dart and cuda were very close. Anyhow, I bought the ones for the dart but have not put them on yet. I have looked them over and compared them to what is one the cuda. My best guess is, they are the correct...

Got mine off ebay a couple of years ago. These things seem to go in waves. Sometimes you will see none listed and the next month there may be 3 listed. The fronts are the same for a-bodies so those are easy to find.

Thank's guys, huge help here. Stuff like this should be kept online here in an archive.

I thought I had asked the question before but can't find it now. I have a 67fb and will be putting the 68-69 window trim on it. I have the clips, but they did not come with any info on mounting locations. I have a diagram for the windshield but no clue what the spacing or location is for the...

It looks correct for a 68. I have their catalog and I cannot tell with it is matted or polished. I think you can get on their website and download the catalog. I cannot get their pictures to show up either on the website.

Roger that, Laysons sells the 67 fender scripts, fender fish, and hood and trunk fish. They just don't sell the rear trim script. They do have it for a 68 however. Too bad, my 67 looks like crap and is all pitted up. Well, unless someone has a nice one to offer!!

Just a note to folks. I spoke with Mike at BEA this morning. They will soon start offering the taillight lenses to go along with the bezels for the 67 Barracuda. I asked him about the possibility of repopping 67 hood inserts as they are always pitted with the chrome coming off them. Mike...

Not only do they look different, but they are physically different back behind the lenses. I believe a 67 only has one hole in the back plate and a 68 has two.

I can't see your photos so don't know if you have the front together or not. Here is what I did and my k-frame was really grimey. You will need something for it to sit in, then spray it down with simply green(it works). Scrape off as much grime as you can. Now take an old toothbrush and use...

I looked at soda blasting because it was cheaper than media blasting, they come to your house, and it is biodegradible. As someone else pointed out it barely touches rust but is great with paint. The down side is you must get it out of every crevice or you are opening a can of worms for future...

Personally, I would take the undercoating off. Anyplace on the body that was undercoated looked like new metal, with the exception of the rails. The rails have holes in them and moisture and dirt get in there. The rails rusted out from the inside and the undercoating hid the problem. My wife...

I vote for Autorusttechnicians also. Goooooood product.

I'll go against the grain here. I thought I only needed to replace the passenger side front floor due to a leaky heater core at some time. I put the car up on the Roto and took the undercoating off and I was I surprised. Three frame rails will need to be replaced. One rear rail was...

DMT is who I bought mine from also. He is a Moparts member(71TA) and a really good guy too!

I have never seen anything that was clear. I have looked at several fenders products and they were either black or a very dark grey.

I have often wondered this myself. For the upper and lower trim, I have seen them available from time to time at Anobrite and Alltrim. I got mine from Anobrite. On a scale of 1-10, they were an 8. A couple of more dings should have been taken out and the paint was sloppy. My grill...

On my 67 Barracuda, there is a "Barracuda" nameplate on the center trunk trim piece. It is pretty rough and I am rebuilding the car, rechroming parts, or buying new. The nameplate is about 10" long but it doesnt' look like anyone is repopping it. I see there is a nameplate for the...

Can't say for sure about a dart but I would imagine it would be the same as my barracuda. Of course you had paint that was body colored in the engine bay and slightly into the tranny tunnel. This paint could also be on the frame rails in this area. The inside of the wheel wells was also...

I just got my ART Caps yesterday. Man are they heavy duty. Apparently they are 13 gauge and the original rails were suppose to have been 14 gauge according to what I have read. The rails do not have the flange at the top of them. If I am reading things correctly it looks like the front rails...

Detroit Muscle Technologies is a good place to go. He is a Mopar man so he tries to be pretty accurate with his stuff. I also believe Laysons probably carries what you are looking for. Give the DMT a look!! Kirk