Search results for query: *

hey thanks for the tip guys , it was just a ground run from the other field to the alternator mount and and she"s sending juice now if you run into this problem it took a 5 inch piece of wire and 1 u connecter to slide in between the field nut , and a clean raw end to put in beteewn alt...

just ground it to anywhere?

ok last year before I put THE BARRACUDA AWAY for winter I was needing a new alternater , they didn't have the 1965 style in a 60 amp so I got a newer style but it has 2 fields but I am not charging. clip for juice only fits on 1 tab . so while I am trying to heal from accident I thought well I...

yah that's what I am finding out saterday will tell more of the story hopefully short and sweet

seems ive been having 1 to many alternator poblems fired the old cuda the other day an the altenator was fried again , that's 3 in the last 2 seasons . single pulley 55amp single field . any 1 else having this problem or possibly have the answer ? voltage reg brand new and good. just an off...

reverse polairity is gr8 , just not on a 4 to 100 or more arking points , but if the correct rocker switch be mated to it you could have perpetual motion , just not needed to see in my vehicles at this time , it can make for some huge headaches. But tesla was well on his way , did you ever...

know my bro inlaw did it with his 68 Cornet/ Super Bee clone 850 hp Built 440 block engine car , but don't know how . ask MRL or OU812 brian at imm .I'm sure with all the knowlge in here ,some 1 will get you pointed in the right direction . GL my brother HAGR812 Winston

wow something hooked up wrong or not grounded and as far as charging you smoked your regulaor now . put in a 50 or 80 we just call it a floater . But they cant take sparking or they will blow especially the stock 1ns . put a few grounds in . The old wires get cracked also and cant take a ton of...

playing with my ignition . all new down to springs and weight adavane stop bushing. ok I have a 3000 stall I've always used the heavy silver springs with a black weight , but after researching msd says in the instructions and computer info ,It suggest a pair of heavy silver springs...

YES ground it like 67dart273 worked like a charm on my old dart

i had that problem with my red 65 barracuda and ended up just running a ground wire from the box to the fire wall and never had the problem again, but it did start previously crossing the starter relay with a screw driver also try crossing it in nutural other wise make sure the grounds are...

i would have to look auto guage , and auto meter are 2 diff company made guages call summit and they will tell you 1 is compatable 1 takes a plug in unit to make itt compatable

i think iwouldcheck the connectionon my ballast resistor to see if 1 was not making a solid connection and broke down any fire i am having a simular problem with my MSD, im loosing power when i was setting timming a month ago it jumped retard , then went to advance , its a mechanical dizzy...

swap out your starter 1nce and watch where the connections are sitting check your fusable link are you using an MSD box it may be sending a false reading make sure it is shielded from any heat source , change out your ballast resistor if you are still running 1 with an MSD . MSD 6al...

I used a 16 guage wire like in your pic and put a 30 amp fuse in it and never had a problem yet they were 35 amp alternators so mu buddy is a fork lift mechanic and said this will hold just fine without starting or melting any wires , Its worked foe 15 years with a 340 and upgraded alternator so...

yes ask for the floating amp regulator it will float to 90 any bump or spark will snap an older black regulator so don't ever jump any 1 or if you do carry a new box with you the silver box floats to 90 wich has 1 drawback and its frying old wiring if you have any cracked wires retape or replace...

if I remember correctly you have to turn the wheels just right pull it all the way back and push the rear end up , rotating the starter , bring it down nose first thru the tight azz hole and it should drop str8 on your nose ouch , that's how I remember it going . you might need a hand...

I just spent a lot of $ building a new engine ,and I found a lot of rust on my msd distributor . I was wondering if this is a common problem ,how it got the moisture , how many of you had the same problem ? and is it effecting your spark or causing you issue"s ? I hate to ruin a new motor over...

first time I ever saw it in mine this 1 hasn't been out enough this year and yes we have had a lot of rain even tho it sits in the garage ,building a new motor i did not add for a new msd distrib

any body ever had this problem , I am changing my motor in my 65 barracuda and its tight so we pulled the didtributor out and found this , but car runs fine yet. try to get a good picture I get this . its rusted on the paddle wheel inside and above on the top of the pickup ciol pick-up ,any 1...

put a switch to the hot post on the starter relay run it into the car put a switch ground it bam turn on the light

good luck with that id hit my thunmb with a hammer first it will be less painfull and and you"ll be real cautios then just go at it like some woman you want slo and finess when you find out its just another peice pay to get what you want

yah know come to think of it my 64 did thatbefore i put it awaylast fall its packed in the garage and snowed in i never did monkey with it thought that was strange but it fire and i put it away let me now what you find out hopen to get mine out by spring if it ever stopps snowing here strat...

put extra grounds on i have 4 on just because and heavy wire its a 14 ft. pull from battery the rest follow the wiring diagram nothing but a hidden shut off should be differant hate to see it get stold or if racing some rules make you have 1 anyways on back of car

i really wish we were closer scotty all your answers are packed neatley on a trailer burried up to the roof in snow in my backyard i have no garage space my health is going down hill and the strorm just wont quit here same as cos said mine all in tacked in car yet tho i do kneed to know...

check on the tranny linkage for a little square boxor a litrtle hump that willl triggger the lights

been stuck more times than i wanna think about becase that and aninetor so i got a floater up to 65 havent had a prob since just dont jump and bodies car or short anything out or you just fried it i lways carry 1 extra with me in both my 65 barracuda"s

that was from my buddie kris he is a fanttastic custom car builder and a bigger smartass but he does only use painless wiring systems and makes it look easy , and award winning look when he is done so i have to go with his word have them make you a nice set that is custom just for your...