Search results for query: *

Running tti 1 7/8 and not hitting.

Part # 9.9489G

Update. Found them. They are Energy Suspension bushings.

Where can get bushings for Dillinger lower arms?

double d shaft. It has flats on both sides.

I have a floor shift column in my car, 72 Dart. The bottom part of the shaft that goes into the box coupler is round and looks to be welded into the steering column. Can I cut the weld and pull the round shaft out and weld dd shaft in its place?

The reason to ream taper is because I have the uca from firm feel already and don't want to buy another set. I am using the KH disc brakes that came on the car to bring the track width in narrower.

Well. I have firm feel uppers with BBJ's, that is why I wanted to do this. Now I'm thinking I could sell and buy the uppers with sbj. I don't know.

Yes. This is what I was looking for. I plan to use the large ball joint with the Kelsey Hayes spindle. Thank you.

I want to use the large ball joint with the Kelsey Hayes spindles.

No one?

When reaming spindle from small joint to large joint, do you drill the hole thru the spindle for the minor diameter first? And then ream?

Front.

What is the hub to hub on a 72 Dart with Kelsey Hayes disc brakes?

I wish you had built them before I bought the QA1.

Just to let you know Summit sells the qa1 for $560.

I've exchanged emails and he stated it was adjustable from 58.5 to 60 inches.

Have a qa1 frame. Very interested.

Maybe it would be better to raise the engine by putting shims under the mounts? How do you know when the engine is in the correct position?

Polylock mounts. New urethane tranny mount. Qa1 k member, borgeson box, dillinger lowers and strut rods, firm feel uppers and afco coil overs.

Can I use 1/4 inch spacers under the k member mounts to lower the k for header clearance? I have tti 17/8 headers and the draglink is touching at full left turn.

That is a ps box, you need a pump and brackets.

Any updates on him? Just wondering if still building control arms.

Does anyone near Hemidenny have a 15 x 7 rally wheel with 4.25 bs that he could test fit on his k frame. This is the size wheel I am using and would appreciate anyone that could offer the use of their wheel for this.

What b body headers did he use?

I have one with TTI headers for over a year now and no problems.

ll

http://www.moparmusclemagazine.com/techarticles/suspension/mopp_1110_cap_auto_products_tubular_front_suspension_install/photo_13.html Here is the link.

How about something like Magnumforce Racing offers except mounted under the inner fenders instead of in the engine compartment? Pretty much what you would do if you had a full cage with snout bars, except instead of being welded to a cage there would be a plate on the firewall?? .. This is...

www.bobsprofab.com. I have his coilover conversion on my 72 Dart.