Search results for query: *

  • Order by relevance
  1. 1968 Dart 270

    1968 Dart radio bracket question

    Hi,I have a 68 Dart 270 that was missing its radio. can anyone here tell me and show me what mounting brackets I would need to install the radio and where they would go,both on the radio and dash? It appears there are two large screws that mount it to the front sheet metal "dimples" in the...
  2. 1WildRT

    denso alt. install question?

    Yes, but with a twist... It's what the voltage regulator uses as it's reference.. So what it really needs is voltage at the battery.. You can read the voltage at the output of the alternator but if there's resistance between the battery & alternator the voltage regulator is now looking at what...
  3. PROSTOCKTOM

    M1 Tunnel Ram Top Plenum Volume Reduction with Photos

    I've been really busy the last 5-weeks, but managed to get back on the plenum project a few days ago. Got the edges all beveled and the halves welded back together. Started filing the welds smooth and a little 50-grit sandpaper works wonders on aluminum. Once the filing and sanding is all done...
  4. Topless69

    67 and 69 Barracuda back-up light

    Why I will not sell plastic bulb holders Yeah I can see why you wouldn’t use plastic You’d be getting out of your car in a parking lot, some guy walking by would say “Yo, your Barracuda’s on fire”… “Huh? Oh thanks man” “No dude, your Barracuda’s ON FIRE!”
  5. 70SwingerGuy

    Swinger Tight Window Issue

    Thanks again, Ill have a good look at everything tomorrow :)
  6. I

    727 Cooler Lines Help

    ok ill check in the morning thanks for your help
  7. PROSTOCKTOM

    Last one to post in this thread wins!

    I stopped at the Speedway to buy some gas last night and I see this Mobile Homeless rig sitting there. I might have to build me one of these in a few years when I can't afford the cost of living increases anymore. Tom
  8. Dana67Dart

    727 Cooler Lines Help

    1/8 way too small 5/16 maybe 3/8" Unless you are racing 5/16 will be fine. What may be different is the location of the fittings on the trans 904 vs 727.
  9. I

    727 Cooler Lines Help

    yea i was looking into inline also seems legit. But what size are the trans cooler lines usually i see one that says 5/16 and the other says like 1/8th?
  10. Dana67Dart

    727 Cooler Lines Help

    Look at inline tube They probably have what you need. If you want to do it yourself, typically there is a male / male fitting on the transmission. Pipe thread on one end and a flare fitting on the other The same most likely holds true for the trans mission end. You can go to the parts store...
  11. moparcuda

    [FOR SALE] 225 carburator base plate trottle

    1966 dart Valiant 225 carburator base plate for rod trottle,very good condition$20. Plus shipping,take paypal
  12. Dana67Dart

    Swinger Tight Window Issue

    The black plastic moves up and down with the glass.and the black plastic is what is in contact with the metal of the vent window frame. The kits available are different than the originals. Which might be part of the issue. If the vent window and side glass is installed I would loosen up all...
  13. ocdart

    2024 14th Annual FABO NHRA "Pick 'Em" Game - It's NITRO Burnin' Time Again!!!

    Done. Your 'locked' Top Fuel pick is now Antron Brown. Please let me know if/whan you want to update any/all of your 'locked' picks.
  14. D

    3-18-24

    I know. Sorry about your family's tragic date
  15. D

    3-18-24

    Thanks
  16. Dana67Dart

    67 and 69 Barracuda back-up light

    If there was only money in it I would I specialize in the parts the aftermarket doesn't I have many designs and I strive for OEM look and feel. I can make most anything out of plastic but have to farm out the metal parts. The plastic is good for a lot of stuff. If you have a special...
  17. Professor Fate

    Swinger Tight Window Issue

    You can try waxing the glass. That has helped me in the past.
  18. I

    727 Cooler Lines Help

    hello i have a 67 dart with a cold case radiator and a 1980 360 727. Im looking for stainless lines for them since i have stainless all around the car already but i dont know what id look for. I have lines to them already but they cut them when removing the motor so even if i kept them i dont...
  19. S

    Went to Daryl Starbird car show in Tulsa this weekend

    Went there in 2008 with my very first Modded PT CRuiser. (Now on #7)
  20. B

    Advice needed on manifold repair

    No sense of humour???
  21. mopar head

    3-18-24

    Sorry to hear Dan, you will remember that date for the rest of your life. My family`s tragic date is friday 13
  22. 318willrun

    3-18-24

    Sorry for your loss
  23. 70SwingerGuy

    Swinger Tight Window Issue

    I agree, it looks like it shouldnt be necessary and there is no grease in there right now. Thanks again for your insight, Ill get back on it tomorrow and see what else I can find, im still thinking something is amiss because the regulator really doesnt want to move :(
  24. 68HemiRR

    [FOR SALE] Aluminum 1/2" 4 Barrel Carburetor Spacer/Adapter

    This is an Aluminum 1/2" 4 Barrel Carburetor Spacer/Adapter. I don't know who the manufacturer is, but it was patented in 1965. I have two of them. $15.00 ea. or both for $25.00. Local pickup, or buyer pays shipping.
  25. B

    NGK plugs.

    NGK 5 heat range is equivalent to a 12 heat range in Champion. I saw a pic about a week ago of a Champion plug where the centre electrode was pushed back inside the insulator......
  26. L

    [WANTED] 3rd gen hemi headers for aftermarket front clip

    I’m looking for some used headers that will fit a 69 dart with 5.7 hemi and aftermarket front clip (no tortion bars) If you have any for sale message me. I’m in Northern California 94513
  27. Dana67Dart

    Swinger Tight Window Issue

    I did but when you look at how the slides work it should not be necessary. In my case Im not sure I had the channels all lined up correctly. I'm not sure if all the pins are still in place :lol:
Back
Top